HomeMy WebLinkAboutC18-342 FCI Constructors FIRST AMENDMENT TO AGREEMENT BETWEEN EAGLE COUNTY, COLORADO AND FCI CONSTRUCTORS, Inc. THIS FIRST AMENDMENT (“First Amendment”) is effective as of the 2nd day of November, 2018 by and between FCI Constructors, Inc., a Colorado corporation (hereinafter “Consultant” or “Contractor”) and Eagle County, Colorado, a body corporate and politic (hereinafter “County”). RECITALS WHEREAS, County and Consultant entered into an agreement dated the 20th day of March, 2018, for certain Services (the “Original Agreement”); and WHEREAS, the Original Agreement, together with Prime Contract Change Order #001, contemplated that the Consultant would perform certain duties with compensation in an amount not to exceed $1,968,869.00. WHEREAS, County and Consultant desire by this First Amendment to expand the scope of Services and compensation as set forth in the Original Agreement. FIRST AMENDMENT NOW THEREFORE, in consideration of the foregoing and the mutual rights and obligations as set forth below, the parties agree as follows: 1. The Original Agreement shall be amended to include additional construction services relating to the remodel of the Eagle County Attorneys' Office as described in Exhibit 1, which is attached hereto and incorporated herein by reference. 2. The compensation for the additional Services set forth in Exhibit 1 shall not exceed $416,185.00 or a total maximum compensation under the Original Agreement and this First Amendment of $2,385,054.00. 3. Capitalized terms in this First Amendment will have the same meaning as in the Original Agreement. To the extent that the terms and provisions of the First Amendment conflict with, modify or supplement portions of the Original Agreement, the terms and provisions contained in this First Amendment shall govern and control the rights and obligations of the parties. 4. Except as expressly altered, modified and changed in this First Amendment, all terms and provisions of the Original Agreement shall remain in full force and effect, and are hereby ratified and confirmed in all respects as of the date hereof. 5. This First Amendment shall be binding on the parties hereto, their heirs, executors, successors, and assigns. DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 2 Eagle County Am Scope and Comp Final 5/14 IN WITNESS WHEREOF, the parties hereto have executed this First Amendment to the Original Agreement the day and year first above written. COUNTY OF EAGLE, STATE OF COLORADO, By and Through Its BOARD OF COUNTY COMMISSIONERS By: ______________________________ Kathy Chandler-Henry, Chair Attest: By: _________________________________ Regina O’Brien, Clerk to the Board CONSULTANT By: _____________________________________ Print Name: ______________________________ Title: ___________________________________ DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 Shane Haas Executive Vice President DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 4/14/11 4:41 PMGoogle MapsINDEX TO DRAWINGSGENERAL NOTESPROJECT TEAMALL WORK SHALL BE EXECUTED IN CONFORMANCE WITH THE 2015 INTERNATIONAL BUILDING CODE AND WITH ALL OTHER RULES, REGULATIONS AND ORDINANCES GOVERNING THE PLACE OF BUILDING. CONTRACTOR SHALL BRING TO THE ATTENTION OF THE ARCHITECT ANY CONFLICTS BETWEEN THE REQUIREMENTS OF THE BUILDING CODE AND THE DRAWINGS. ALL WORK SHALL BE PERFORMED TO THE HIGHEST STANDARDS OF CRAFTSMANSHIP BY JOURNEYMEN OF THE APPROPRIATE TRADES. ALL DIMENSIONS NOTED TAKE PRECEDENCE OVER SCALE. DIMENSIONS NOTED WITH "N.T.S." DENOTE NOT TO SCALE. CONTRACTOR IS HEREBY NOTIFIED ASSUMPTIONS HAVE BEEN MADE ABOUT THE CONSTRUCTION METHODS, SYSTEMS AND MATERIALS ORIGINALLY USED IN THE BUIILDING. THE CONTRACTOR, IN THE COURSE OF PERFORMING INVASIVE TESTING DURING CONSTRUCTION, SHALL VERIFY THE ACCURACY OF THE ASSUMPTIONS AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES. CONTRACTOR SHALL VERIFY THE DIMENSIONS AND CONDITIONS OF ALL AFFECTED AREAS OF EXISTING STRUCTURE/SITE AND SHALL REPORT TO THE ARCHITECT, IN WRITING, ANY DISCREPANCIES BETWEEN ACTUAL EXISTING CONDITIONS AND THE DRAWINGS. CONTRACTOR SHALL TAKE REASONABLE MEASURES TO LOCATE AND MARK ALL UTILITIES IN AREAS OF WORK PRIOR TO COMMENCING DEMOLITION WORK. ARCHITECT IS NOT RESPONSIBLE IN ANY WAY FOR THE MEANS, METHODS, SEQUENCE, PROCEDURES, TECHNIQUES OR SCHEDULING OF CONSTRUCTION OR FOR JOB SAFETY. THESE DUTIES ARE THE RESPONSIBILITY OF THE CONTRACTOR. ALL BUILDING COMPONENTS SHALL BE INSTALLED PER MANUFACTURER'S RECOMMENDATIONS. CONTRACTOR SHALL iNSTRUCT EACH OF THE SUBCONTRACTORS TO BECOME THOROUGHLYFAMILIAR WITH ALL OF THE DRAWINGS. WHEREVER EXISTING CONDITIONS MAY HAVE A BEARINGON THE EXPEDITIOUS PERFORMANCE, AND COST, OF THE WORK, THE SUBCONTRACTOR SHALLVISIT THE JOB SITE AND PERSONALLY INSPECT AND VERIFY THE SITE FOR COMPARISON WITH THEDRAWINGS.KEY PLANARCHITECT: MENENDEZ ARCHITECTS, P.C. 715 W.MAIN ST., SUITE 104 ASPEN, CO 81611 Tel. 970 544-4851 Fax 970 544-1915 E-mail: LAM@MenendezArchitects.com CONTACT: LUIS MENENDEZG-001 A-101 A-102 A-103 A-104 A-105 A-106 A-107 A-108 A-201 A-401 A-402 A-501 A-601 S1.1 S2.1 S2.2 S2.3 S2.4 S2.5 P1.0 P2.0 M1.0 M1.1 M2.0 M2.1D M2.1 M2.2 M3.0 M3.1 M3.2 E1.0 E1.1 E2.0 E2.1 E3.0 E3.1 TITLE SHEET, GENERAL NOTES EXISTING/DEMO MAIN LEVEL FLOOR PLAN EXISTING/DEMO UPPER LEVEL FLOOR PLAN PROPOSED MAIN LEVEL FLOOR PLAN PROPOSED UPPER LEVEL FLOOR PLAN EXISTING/DEMO MAIN LEVEL REFLECTED CEILING PLAN EXISTING/DEMO UPPER LEVEL REFLECTED CEILING PLAN PROPOSED MAIN LEVEL REFLECTED CEILING PLAN PROPOSED UPPER LEVEL REFLECTED CEILING PLAN EXTERIOR ELEVATIONS INTERIOR ELEVATIONS INTERIOR ELEVATIONS DETAILS SCHEDULES GENERAL NOTES, LEGEND, DETAIL & SHEET INDEX EXISTING MAIN FLOOR FOUNDATION EXISTING UPPER LEVEL FRAMING PLAN EXISTING ROOF FRAMING PLAN PROPOSED MAIN FLOOR FOUNDATION & FRAMING PLAN PROPOSED UPPER LEVEL FRAMING PLAN PLUMBING LEGEND, SPECS & SCHEDULES MAIN LEVEL PLUMBING PLAN MECHANICAL LEGEND, SPECS & SEQUENCE MECHANICAL SCHEDULES & DETAILS BASEMENT HVAC PLAN 1ST FLOOR HVAC DEMO PLAN 1ST FLOOR HVAC PLAN 2ND FLOOR HVAC PLAN BASEMENT MECHANICAL PIPING PLAN 1ST FLOOR MECHANICAL PIPING PLAN 2ND FLOOR MECHANICAL PIPING PLAN ELECTRICAL LEGEND, SPECS, & DETAILS ELECTRICAL ONE-LINE & PANEL SCHEDULES 1ST FLOOR POWER & SYSTEMS PLAN 2ND FLOOR POWER & SYSTEMS PLAN 1ST FLOOR LIGHTING PLAN 2ND FLOOR LIGHTING PLAN1. 2. 3. 4. 5. 6. 7. 8. 9. SITEPROJECT DESCRIPTIONVICINITY MAPEAGLE COUNTYATTORNEY OFFICE REMODEL500 BROADWAY, EAGLE , CO 81631OWNER: EAGLE COUNTY GOVERNMENT C/O PROJECT MANAGEMENT DEPARTMENT P.O. BOX 850 EAGLE, CO 81631-0850 Tel. 970 328-3532 E-mail: josh.miller@eaglecounty.us CONTACT: MR. JOSH MILLERTENANT IMPROVEMENT WORK: RECONFIGURE PART OF EXISTING FIRST AND SECOND FLOOR OFFICE SPACE IN AN EXISTING 2-STORY OVER BASEMENT MIXED-USE BUILDING. NO ADDITIONAL FLOOR AREA OR CHANGE IN USE ARE PROPOSED.EXISTING BUILDING INFORMATION (PER ORIGINAL PLANS DATED 06/01/1992): NUMBER OF STORIES = 2 STORIES OVER BASEMENT (GARDEN LEVEL) OCCUPANCY: B-2 WITH A-3 EAGLE COUNTY ROOM (COMMISSIONERS HEARING ROOM) CONSTRUCTION TYPE: TYPE III, ONE-HOUR. FIRESPRINKLERS WAIVE ONE-HOUR REQUIREMENTS EXCEPT FOR SHAFT ENCLOSURES, CORRIDORS, STAIR ENCLOSURES, EXIT PASSAGEWAYS. BUILDING IS FIRE SPRINKLERED; MODIFY SYSTEM IN SUBJECT SPACES, PER CODE REQUIREMENTS, FOR NEW LAYOUT. BUILDING CODES: 2015 INTERNATIONAL BUILDING CODE 2015 INTERNATIONAL MECHANICAL CODE 2015 INTERNATIONAL PLUMBING CODE 2017 NATIONAL ELECTRICAL CODE 2015 INTERNATIONAL ENERGY CONSERVATION CODE 2015 INTERNATIONAL FUEL GAS CODE TOWN OF EAGLE TITLE 13 EAGLE MUNICIPAL - BUILDING & CONSTRUCTION CODE AMENDMENTSMECHANICAL/ELECTRICAL ENGINEER: ARCHITECTURAL ENGINEERING CONSULTANTS 40801 US HIGHWAY 6 & 24, SUITE 214 AVON, CO 81620 P.O. BOX 8489 AVON, CO 81620 Tel. 970 748-8520 Fax 970 748-8521 CONTACT FOR ELECTRICAL: STAN HUMPHRIES E-mail: stan@aec-vail.com CONTACT FOR MECHANICAL: TAYLOR CRITCHLOW E-mail: taylor@aec-vail.comSTRUCTURAL ENGINEER: GLENWOOD STRUCTURAL AND CIVIL, INC. 2425 SOUTH GRAND AVENUE, SUITE 102 GLENWOOD SPRINGS, CO 81601 Tel. 970 928-0135 Fax 970 928-9804 E-mail: gsc@sopris.net CONTACT: ADOLFO GORRAIMPORTANT PROJECT REQUIREMENTDO NOT USE ANY MATERIALS (INCLUDING CONSTRUCTION ADHESIVES, ADHESIVE REMOVERS, PARTICLE BOARD, ETC.), AND FINISHES (INCLUDING PAINTS, SEALERS, STAINS, CARPETS, ETC.) THAT EMIT TOXINS INTO THE AIR. ALL MATERIALS AND FINISHES SHALL BE NON-TOXIC AND LOW VOC.1st FLOOR EAGLE COUNTY GOVERNMENT CENTERATTORNEY OFFICETITLE SHEET, GENERAL NOTES715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18Revision:Date:#: Building Dept.:G-001PERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 131A-2012A-201LKLKJJ121213131414SCALE: 1/4" = 1'-0"EXISTING/DEMO MAIN LEVEL FLOOR PLAN1UPOFFICE 4DNOFFICE 5BREAK ROOM OFFICE 1STAIR 1OFFICE 2BATHROOMELEVATORHALLWAY 1RECEPTION OFFICE 3OPEN OFFICELOADING DOCKSTAIR 2SERVICE VESTIBULEHALLWAY 2ENTRYA-101EXISTING/DEMO MAIN LEVEL FLOOR PLAN1 2 3 4 5 6 7 8 9 10 11 12 CONFORM TO ALL APPLICABLE CODES RELATING TO DEMOLITION AND HAZARDOUS MATERIALS. COMPLY WITH STATE REGULATIONS REGARDING ASBESTOS TESTING AND ABATEMENT WORK. ERECT AND MAINTAIN TEMPORARY BARRIERS AND SECURITY DEVICES. ERECT AND MAINTAIN TEMPORARY PARTITIONS TO PREVENT SPREAD OF DUST. PREVENT MOVEMENT OF STRUCTURE. PROVIDE BRACING AND SHORING AND DESIGN OF SAME BY QUALIFIED PROFESSIONAL. PROTECT EXISTING STRUCTURE, FINISHES, EQUIPMENT, ETC. WHICH ARE NOT TO BE DEMOLISHED. DEMOLISH AND REMOVE COMPONENTS IN AN ORDERLY AND CAREFUL MANNER. DISCONNECT AND CAP/ABANDON UTILITIES AS NECESSARY. REMOVE DEMOLISHED MATERIALS FROM SITE AS WORK PROGRESSES AND DISPOSE IN AN APPROVED AND LEGAL MANNER. LEAVE AREAS OF WORK IN CLEAN CONDITION. MAINTAIN EGRESS AND ACCESS AT ALL TIMES. FURNITURE IN AREAS OF WORK SHALL BE REMOVED BY OWNER. DEMOLITION NOTESWALL TYPE LEGENDEXISTING PARTITION TO BE REMOVEDEXISTING PARTITION TO REMAINKEYNOTES1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18EXISTING DOOR TO REMAIN. REMOVE DOOR AND FRAME AND SALVAGE FOR FUTURE USE BY OWNER. REMOVE EXISITING DOOR AND FRAME. SALVAGE DOOR, AND SINGLE DOOR FRAME, FOR RE-USE ON THIS PROJECT WHERE INDICATED ON PROPOSED FLOOR PLAN. REMOVE INTERIOR WINDOW AND FRAME. DASHED LINE INDICATES CHANGE IN CEILING PLANE. EXISTING FLOOR TILE TO REMAIN. EXISTING INTERIOR PARTITIONS DO NOT APPEAR TO BREAK THROUGH CEILING PLANE. KEEP GRID PORTION OF SUSPENDED ACOUSTICAL BOARD CEILING (BOARDS SHALLL BE REPLACED) AND ALL OF SUSPENDED DRYWALL CEILING, TYPICAL. EXISTING VINYL PLANK FLOORING, AND ADHESIVE TO BE REMOVED. DO NOT USE ADHESIVE REMOVER THAT CONTAINS TOXINS. EXISTING CARPET TO BE REMOVED. IF GLUE-DOWN CARPET, ALSO REMOVE ADHESIVE WITH A TOXINS FREE ADHESIVE REMOVER. EXISTING BREAK ROOM CABINETS, COUNTERTOP AND REFRIGERATOR TO REMAIN. EXISTING UTILITY SINK TO BE REMOVED. CAP WATER AND DRAIN LINES SO THAT THEY ARE NOT VISIBLE. EXISTING BATHROOM TO REMAIN. EXISTING RECEPTION COUNTER TO BE REMOVED SHOWN DASHED. REMOVE SECTION OF EXISTING WOOD FRAMED WALL AND BRICK VENEER FOR NEW WINDOW. SEE PROPOSED FLOOR PLANS. REMOVE EXISTING EXTERIOR WINDOWS SHOWN DASHED. PROTECT WATER COOLER FOR RE-USE. EXISTING BEARING WALL TO BE REMOVED, SEE STRUCTURAL. REMOVE EXISTING MATRIX PAD FOR RE-USE ON THIS PROJECT.112211111133445678899101112131416151517418sinkR715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18 Revision:Date: #: Building Dept.:PERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 51A-2012A-201LKLKJJ121213131414SCALE: 1/4" = 1'-0"EXISTING/DEMO UPPER LEVEL FLOOR PLAN1A-102EXISTING/DEMO UPPER LEVEL FLOOR PLANDNSTAIR 1STORAGEOFFICE 6OFFICE 7STORAGE 2OFFICE 9OPEN OFFICEWALL TYPE LEGENDEXISTING PARTITION TO BE REMOVEDEXISTING PARTITION TO REMAINKEYNOTES1 2 3 4 5 6 7 8EXISTING DOOR TO REMAIN. PRIME AND PAINT. EXISTING INTERIOR WINDOW TO REMAIN, PRIME AND PAINT. REMOVE INTERIOR WINDOW AND FRAME. DASHED LINE INDICATES CHANGE IN CEILING PLANE. EXISTING INTERIOR PARTITIONS DO NOT APPEAR TO BREAK THROUGH CEILING PLANE. KEEP GRID PORTION OF SUSPENDED ACOUSTICAL BOARD CEILING (BOARDS SHALLL BE REPLACED) AND ALL OF SUSPENDED DRYWALL CEILING, TYPICAL EXISTING CARPET TO BE REMOVED THROUGHOUT, INCLUDING STAIR. IF GLUE-DOWN CARPET, ALSO REMOVE ADHESIVE WITH A TOXINS FREE ADHESIVE REMOVER. EXISTING WINDOW TO REMAIN AS-IS. REMOVE EXISITING DOOR AND FRAME FOR RE-USE ON THIS PROJECT. NEW LOCATION INDICATED ON PROPOSED FLOOR PLAN. 18435566311777777715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18 Revision:Date: #: Building Dept.:PERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 13563A-2015A-2013WA-4013SA-4015S1EA-4021W1N3EA-4024W3N4S4W294A-2016A-4025N1EA-4011NLKLKJJ121213131414ALIGNALIGNALIGN6 5/8"6 5/8"EQ.EQ.SCALE: 1/4" = 1'-0"PROPOSED MAIN LEVEL FLOOR PLAN1UPFACILITIES OFFICE 1DNFACILITIES OFFICE 2BREAK ROOMSTAIR 1EXECUTIVE LEGAL ASSISTANTBATHROOMELEVATORLOBBYCOUNTY ATTORNEYCONFERENCE ROOMLOADING DOCKSTAIR 2SERVICE VESTIBULEHALLWAY 2FILES ROOMA-103PROPOSED MAIN LEVEL FLOOR PLANPATIOSTORAGEPROPOSED FLOOR TO CEILING PARTITION, FRAME USING 3 5/8" METAL STUDS (UNLESS OTHERWISE NOTED) AND FINISH WITH 5/8" DRYWALL. INSULATE FOR SOUND. SEE 1/A-501 FOR TYP. WALL ASSEMBLY.EXISTING PARTITION TO REMAINWALL TYPE LEGENDEXISTING PARTITION TO BE REMOVEDKEYNOTES1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22FINISH AND PATCH AREAS OF NEW WORK (WALLS, FLOOR AND CEILING) TO BLEND SEAMLESSLY WITH EXISTING CONSTRUCTION, TYPICAL. DO NOT INSTALL NEW PARTITIONS OVER EXISTING FLOORING, TYPICAL. USE HEAVY GAUGE STEEL STUDS AT ALL NEW DOOR JAMBS (HINGE AND STRIKE SIDES), TYPICAL INSULATE AND CAULK ALL NEW FULL HEIGHT (TO CEILING) PARTITIONS FOR SOUND, TYPICAL. NEW COUNTERTOP WITH BASE CABINETS, SEE INTERIOR ELEVATIONS. DASHED LINE INDICATES NEW UPPER CABINETS, SEE INTERIOR ELEVATIONS. NEW SINK AND FAUCET. USE ELKAY DAYTON ELITE STAINLESS STEEL SINGLE BOWL SINK MODEL DSESR12722 WITH SINGLE FAUCET HOLE AND KOHLER ELATE KITCHEN SINK FAUCET WITH PULLOUT SPRAY SPOUT MODEL K-13963-CP. NEW LOCATION FOR SALVAGED DOOR. RE-FINISH DOOR AND FRAME. RE-USE EXISTING WATER COOLER WHERE SHOWN. REMOVE AND RECONNECT/INSTALL. CHANGE IN FLOORING MATERIAL. NEW ALUMINUM CLAD WOOD BI-FOLD DOORS, SEE WINDOW SCHEDULE. RELOCATE SALVAGED MATRIX SYSTEM PAD TO THIS LOCATION TO CONTROL THIS DOOR. PROVIDE NECESSARY DATA AND POWER LINES AS NEEDED. NO IMPROVEMENTS PLANNED FOR THIS SPACE. ADD WEATHERSTRIPPING TO EXISTING DOORS FOR SOUND, TYPICAL. NEW CONFERENCE ROOM WALLS SHALL EXTEND TO BOTTOM OF FLOOR JOISTS. INSULATE AND CAULK WALLS FOR SOUND FULL HEIGHT. RUN NEW WATER LINE, WITH STOP, TO NEW WATER COOLER LOCATION. PROVIDE WOOD BLOCKING BETWEEN STUDS TO SERVE AS BACKING FOR MOUNTING LARGE TV/DISPLAY BRACKET. POWER OUTLET SHALL BE CLOCK-TYPE (RECESSED). VERIFY MOUNTING HEIGHT WITH OWNER. CONFIRM FINAL TV LOCATION WITH OWNER PRIOR TO INSTALLATION. PROVIDE SEWER EJECTOR IN BASE CABINET FOR NEW SINK. ROUTE TO EXISTING BATHROOM WASTE PLUMBING. NEW EXTERIOR PRIVACY WALLS TO ENCLOSE EXISTING PATIO, SEE EXTERIOR ELEVATIONS. ALIGN TOP OF THIS NEW WALL WITH TOP OF EXISTING ADJOINING WALL, NOT FULL HEIGHT. NEW ALUMINUM CLAD WOOD WINDOW, SEE WINDOW SCHEDULE. NEW GATE AT EXTERIOR PRIVACY WALLS, MATCH WALL FINISH MATERIAL.1112, 433567, 18889, 161011121314141516 17193131313132121224420201919RMODELNUMBERTRADENAMEPRODUCTMATERIAL715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:LM & MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18Revision:Date: #: Building Dept.:PERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 783A-2015A-2012SA-401A-4022WA-4014SLKLKJJ121213131414ALIGNALIGNALIGN4'-0"4'-2"7'-0"2'-0"2'-3 1/2"± 8'-10 3/8"(R.O.)5 1/2"5 1/2" (VERIFY,CONCEAL POST)SCALE: 1/4" = 1'-0"PROPOSED UPPER LEVEL FLOOR PLAN 1A-104PROPOSED UPPER LEVEL FLOOR PLANDNSTAIR 1STORAGECOPY ROOMOPEN OFFICEASSISTANT COUNTY ATTORNEY 2ASSISTANT COUNTY ATTORNEY 3OFFICEASSISTANT COUNTY ATTORNEYHALLWAYPROPOSED FLOOR TO CEILING PARTITION, FRAME USING 3 5/8" METAL STUDS (UNLESS OTHERWISE NOTED) AND FINISH WITH 5/8" DRYWALL. INSULATE FOR SOUND. SEE 1/A-501 FOR TYP. WALL ASSEMBLY.EXISTING PARTITION TO REMAINWALL TYPE LEGENDEXISTING PARTITION TO BE REMOVEDKEYNOTES1 2 3 4 5 6 7 8 9 10 DASHED LINE INDICATES EXISTING CHANGE IN CEILING PLANE. FINISH AND PATCH AREAS OF NEW WORK (WALLS, FLOOR AND CEILING) TO BLEND SEAMLESSLY WITH EXISTING CONSTRUCTION, TYPICAL. DO NOT INSTALL NEW PARTITIONS OVER EXISTING FLOORING, TYPICAL. USE HEAVY GAUGE STEEL STUDS AT ALL NEW DOOR JAMBS (HINGE AND STRIKE SIDES), TYPICAL INSULATE AND CAULK ALL NEW FULL HEIGHT (TO CEILING) PARTITIONS FOR SOUND, TYPICAL. NOT USED. ADD WEATHERSTRIPPING TO EXISTING DOORS FOR SOUND, TYPICAL. NEW FULL HEIGHT GLASS PARTITION, SEE INTERIOR ELEVATIONS. NOT USED. REPLACE CARPET FLOORING ON THIS ENTIRE LEVEL AND STAIR, SEE ROOM FINISH SCHEDULE.1223, 53, 54778141010715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:LM & MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18Revision:Date: #: Building Dept.:PERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 SSSSSSSLKLKJJ121213131414CLG. HT.+7'-11 3/4"CLG. HT.+9'-3"CLG. HT.+9'-2 1/4"CLG. HT.+9'-2 1/4"CLG. HT.+8'-0"CLG. HT.+9'-3 1/2"CLG. HT.+9'-3 1/2"CLG. HT.+9'-8 1/2"CLG. HT.+18'-7 1/4"slopeA-105EXISTING/DEMO MAIN LEVEL REFLECTED CEILING PLANSCALE: 1/4" = 1'-0"EXISTING/DEMO MAIN LEVEL REFLECTED CEILING PLAN1OFFICE 4OFFICE 5BREAK ROOMOFFICE 1STAIR 1OFFICE 2BATHROOMELEVATORHALLWAY 1RECEPTIONOFFICE 3OPEN OFFICESTAIR 2SERVICE VESTIBULEHALLWAY 2ENTRY1 2 3 4 5 6 7 8 9 10EXISTING SUSPENDED DRYWALL CEILING TO REMAIN, TYPICAL. EXISTING FLUORESCENT TROFFER LIGHT FIXTURES TO BE REMOVED FOR REPLACEMENT WITH NEW LED TROFFER FIXTURES, SEE ELECTRICAL PLANS, TYPICAL. EXISTING SURFACE MOUNT LIGHT FIXTURE TO BE REMOVED. EXISTING AIR DEVICE TO REMAIN, SEE MECHANICAL PLANS. EXISTING FIRESPRINKLER HEAD. ADJUST LOCATION AND/OR ADD HEADS AS NECESSARY TO MEET CODE REQUIREMENTS AT NEW ROOM CONFIGURATIONS, TYPICAL. FIRE SPRINKLER MODIFICATIONS, IF NEEDED, SHALL BE DESIGN-BUILD. EXISTING SMOKE DETECTOR, SEE ELECTRICAL PLAN, TYPICAL. EXISTING CEILING DIFFUSER TO BE REMOVED SHOWN DASHED, SEE MECHANICAL PLANS. REMOVE EXISTING ACOUSTICAL BOARDS FOR REPLACEMENT, SEE PROPOSED REFLECTED CEILING PLAN. REMOVE EXISTING DRYWALL CEILING AND FRAMING AT THIS LOCATION. EXISTING ACOUSTICAL BOARDS IN THIS AREA TO REMAIN.DEMOLITION KEYNOTES 122445566 8 8 8977774444533 10 10 8715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18Revision:Date: #: Building Dept.:PERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 SSSLKLKJJ121213131414CLG. HT.+0'-11"BEAM HT.+7'-1 1/2"CLG. HT.+9'-10 1/2"CLG. HT.+8'-4 1/2"CLG. HT.+8'-3 5/8"CLG. HT.+7'-0 1/2"CLG. HT.+8'-3 1/2"BEAM HT.+7'-1"CLG. HT.+4'-7 3/4"CLG. HT.+5'-9 1/4"SCALE: 1/4" = 1'-0"EXISTING/DEMO UPPER LEVEL REFLECTED CEILING PLAN1STORAGEOFFICE 6OFFICE 7STORAGE 2OFFICE 9OPEN OFFICEA-106EXISTING/DEMO UPPER LEVEL REFLECTED CEILING PLAN1 2 3 4 5 6 7 8 9 EXISTING SUSPENDED DRYWALL CEILING TO REMAIN, TYPICAL. PATCH AND FINISH AREAS OF EXISTING DRYWALL CEILING WHERE EXISTING WALLS REMOVED TO BLEND SEAMLESSLY WITH EXISTING CONSTRUCTION, TYPICAL. REMOVE EXISTING ACOUSTICAL BOARDS FOR REPLACEMENT, SEE PROPOSED REFLECTED CEILING PLAN. EXISTING FIRESPRINKLER HEAD. ADJUST LOCATION AND/OR ADD HEADS AS NECESSARY TO MEET CODE REQUIREMENTS AT NEW ROOM CONFIGURATIONS, TYPICAL. FIRE SPRINKLER MODIFICATIONS, IF NEEDED, SHALL BE DESIGN-BUILD. EXISTING SMOKE DETECTOR, SEE ELECTRICAL PLAN, TYPICAL. EXISTING RECESSED DOWNLIGHT TO REMAIN, TYPICAL, WHERE SHOWN. EXISTING LIGHT FIXTURE TO BE REMOVED. SEE ELECTRICAL PLANS FOR NEW LIGHTING. EXISTING FLUORESCENT TROFFER LIGHT FIXTURES TO BE REMOVED FOR REPLACEMENT WITH NEW LED TROFFER FIXTURES, SEE ELECTRICAL PLANS, TYPICAL. EXISTING CEILING DIFFUSER TO REMAIN, TYPICAL, SEE MECHANICAL PLANS. DEMOLITION KEYNOTES1122 3 3445568778 37799999715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18Revision:Date: #: Building Dept.:PERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 SSSSSSSLKLKJJ121213131414CLG. HT.+7'-11 3/4"CLG. HT.+9'-3"CLG. HT.+9'-2 1/4"CLG. HT.+9'-2 1/4"CLG. HT.+9'-3 1/2"CLG. HT.+9'-3 1/2"CLG. HT.+9'-8 1/2"CLG. HT.+18'-7 1/4"slopeCLG. HT.+9'-3"A-107PROPOSED MAIN LEVEL REFLECTED CEILING PLANSCALE: 1/4" = 1'-0"PROPOSED MAIN LEVEL REFLECTED CEILING PLAN1STAIR 1BATHROOMELEVATORSTAIR 2SERVICE VESTIBULEFACILITIES OFFICE 1FACILITIES OFFICE 2CONFERENCE ROOMHALLWAY 2FILES ROOMBREAK ROOMEXECUTIVE LEGAL ASSISTANTLOBBYCOUNTY ATTORNEYSTORAGEKEYNOTES1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 EXISTING DRYWALL CEILING TO REMAIN. EXISTING LIGHT FIXTURE TO REMAIN. NEW EXPOSED STEEL BEAM. NEW ACOUSTICAL CEILING TILES, ADD GRID SUPPORT FOR 2x2 MODULE, TYPICAL. EXISTING CEILING MOUNTED UNIT HEATER TO REMAIN. NEW 2x2 LED TROFFER LIGHT FIXTURE, SEE ELECTRICAL PLAN, TYPICAL. ADD GRID SUPPORT AS NEEDED FOR 2x2 MODULE, TYPICAL. EXISTING CEILING DIFFUSER TO REMAIN, SEE MECHANICAL PLANS. EXISTING FIRE SPRINKLER HEAD. NEW HEADS, AS MAY BE REQUIRED BY CODE FOR NEW ROOM ARRANGEMENTS ARE NOT SHOWN, TYPICAL. EXISTING OR NEW SMOKE DETECTOR, SEE ELECTRICAL PLAN, RELOCATE AS NEEDED, TYPICAL. NEW CEILING DIFFUSER, SEE MECHANICAL PLANS NEW RECESSED DOWNLIGHT,TYPICAL OF SIX THIS LEVEL, CONFIRM WITH ELECTRICAL PLAN. NEW SURFACE MOUNT LIGHT FIXTURE, TYPICAL WIRE FOR FUTURE INFRARED ELECTRIC HEATER, TYPICAL OF TWO. CAP JUNCTION BOX WHERE LIGHT FIXTURE REMOVED, TYPICAL. NEW EXIT SIGN. 12 13 4 4 4612672888999911127101010777715151515151512132662655101414 47711715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18Revision:Date: #: Building Dept.:PERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 SSSLKLKJJ121213131414CLG. HT.+0'-11"BEAM HT.+7'-1 1/2"CLG. HT.+9'-10 1/2"CLG. HT.+8'-4 1/2"CLG. HT.+8'-3 5/8"CLG. HT.+7'-0 1/2"CLG. HT.+8'-3 1/2"BEAM HT.+7'-1"CLG. HT.+4'-7 3/4"CLG. HT.+5'-9 1/4"SCALE: 1/4" = 1'-0"PROPOSED UPPER LEVEL REFLECTED CEILING PLAN1A-108PROPOSED UPPER LEVEL REFLECTED CEILING PLANSTAIR 1STORAGECOPY ROOMOPEN OFFICEASSISTANT COUNTY ATTORNEY 2ASSISTANT COUNTY ATTORNEY 3OFFICEASSISTANT COUNTY ATTORNEYHALLWAYKEYNOTES1 2 3 4 5 6 7 8 9 10 11 12 13. 14. 15.EXISTING DRYWALL CEILING TO REMAIN, TYPICAL. EXISTING RECESSED DOWNLIGHT TO REMAIN, SEE ELECTRICAL PLAN. NEW ACOUSTICAL CEILING TILES, ADD GRID SUPPORT FOR 2x2 MODULE, TYPICAL. NEW WOOD CEILING BOARDS. NEW 2x2 LED TROFFER LIGHT FIXTURE, SEE ELECTRICAL PLAN, TYPICAL. ADD GRID SUPPORT AS NEEDED FOR 2x2 MODULE, TYPICAL. EXISTING CEILING DIFFUSER TO REMAIN, SEE MECHANICAL PLANS. EXISTING FIRE SPRINKLER HEAD. NEW HEADS, AS MAY BE REQUIRED BY CODE, FOR NEW ROOM ARRANGEMENTS ARE NOT SHOWN, TYPICAL. EXISTING OR NEW SMOKE DETECTOR, SEE ELECTRICAL PLAN, TYPICAL. NEW RECESSED DOWNLIGHT, SEE ELECTRICAL PLAN. NEW CEILING DIFFUSER, SEE MECHANICAL PLANS. NEW SURFACE MOUNT LIGHT FIXTURE, TYPICAL. NOT USED. EXISTING LIGHT FIXTURE MOVED TO NEW LOCATION. EXISTING 2x2 TROFFER LIGHT FIXTURE TO REMAIN. REPLACE IF NOT LED TYPE. NEW EXIT SIGN. 12 3 3 411778891013666666213999915131313151414131391069715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18Revision:Date: #: Building Dept.:PERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 CAB12A-50112A-50113A-50113A-50114A-50114A-50114A-50114A-501SIM.SIM.SIM.14A-501FLASHING JOINTLK1413T.O. CONC. SLABELEV. 98'-0"T.O. SHEATHINGELEV. 110'-0"11'-2"10"B.O. JOISTSELEV. 109'-2"11'-2"10"T.O. CONC. SLABELEV. 98'-0"T.O. SHEATHINGELEV. 110'-0"B.O. JOISTSELEV. 109'-2"LK1413T.O. CONC. SLABELEV. 98'-0"T.O. SHEATHINGELEV. 110'-0"11'-2"10"B.O. JOISTSELEV. 109'-2"6'-0"6'-0"± 8'-4"(MATCH EXISTING WINDOW)EXISTING SOUTH ELEVATIONSCALE: 1/4" = 1'-0"1EXISTING EAST ELEVATIONSCALE: 1/4" = 1'-0"2PROPOSED SOUTH ELEVATIONSCALE: 1/4" = 1'-0"3PROPOSED EAST ELEVATIONSCALE: 1/4" = 1'-0"5NEW EXTERIOR PARTION WITH SHEET METAL WALL CLADDING TYPICALNEW ALUMINUM CLAD WOOD WINDOW, TYP.NEW ALUMINUM CLAD WOOD BI-FOLD DOORS. SIZE FOR A SNUG FIT IN EXISTING MASONRY OPENINGNEW ALUMINUM CLAD WOOD WINDOW, TYP.NEW LIMESTONE SILL TO MATCH EXISTINGNEW MASONRY LINTEL TO MATCH EXISTING WINDOW LINTELSPROPOSED SOUTH ELEVATION 2SCALE: 1/4" = 1'-0"4EXTERIOR FINISH NOTESSHEET METAL WALL CLADDING: MATCH EXISTING ENGLERT DARK BRONZE STANDINGING SEAM ROOFING ON ROOF. NEW EXTERIOR PARTION WITH SHEET METAL WALL CLADDING TYPICALNEW GATEREMOVE DOOR LEVER HANDLES ON EXISTING DOORS AND FRAME A NEW THIN PARTION WITHIN THE DOOR FRAME. FINISH WITH 5/8" THICK MDO GENERAL GRADE PLYWOOD TO SERVE AS A 'CANVAS' FOR NEW ART MURAL (MURAL NOT IN SCOPE OF WORK). PRIME EDGES, BACK AND FRONT OF PLYWOOD.PROPOSED EAST ELEVATION 2SCALE: 1/4" = 1'-0"6PATCH BRICK VENEER AROUND NEW WINDOW AS NEEDED715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18Revision:Date: #: Building Dept.:A-201EXTERIOR ELEVATIONSPERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 5A-5013A-5012A-5014A-5019A-50111A-50110A-5016A-5017A-5018A-5019A-50110A-50111A-5019A-50110A-5013/4" SCRIBE1'-3"1'-3"2'-6"2'-0"EQ.TYP.4"2'-4 1/2"1 1/2"2'-10"3/4" SCRIBE3'-6"± 1'-7 3/4"1"3/4" SCRIBE1'-3"1'-3"2'-6"2'-0"± 2'-7 3/4"2'-6"EQ.EQ.EQ.EQ.EQ.EQ.4'-0"1/4"1/4"EQ.EQ.NEW FULL GLASS DOORNEW TRANSOM WINDOW DASHED LINES INDICATE NEW CHAIR RAIL ON OFFICE SIDE, TYP.NEW INTERIOR WINDOW, USE CLEAR TEMPERED GLASS, TYPICAL STIPLING INDICATES AREAS OF DRYWALL, TYPICALNEW BASEBOARD, TYPICALSCALE: 1/2" = 1'-0"SOUTH2OFFICESCALE: 1/2" = 1'-0"WEST3BREAK ROOMSOUTHFINISHED CABINET PANEL, TYPICAL WHERE EXPOSED24" DEEP BASE CABINETS15" DEEP UPPER CABINETS W/ ADJUSTABLE SHELVES, TYPICALFINISHED END PANEL, TYPICAL BOTH SIDESLIGHT VALANCE, TYPICALNEW PLASTIC LAMINATE COUNTERTOP, BACK-SPLASH AND RETURNSTIPLING INDICATES AREAS OF DRYWALL, TYPICALSCALE: 1/2" = 1'-0"SOUTH5LOBBY STIPLING INDICATES AREAS OF DRYWALL, TYPICALNEW BASEBOARD, TYPICALHOT ROLLED STEEL WALL CLADDINGSCALE: 1/2" = 1'-0"EAST1COUNTY ATTORNEYNORTH STIPLING INDICATES AREAS OF DRYWALL, TYPICALNEW BASEBOARD, TYPICALHOT ROLLED STEEL WALL CLADDINGRETURN HOT ROLLED STEEL WALL CLADDING TO WINDOW, TYPICALSCALE: 1/2" = 1'-0"4OPEN OFFICESOUTHSTIPLING INDICATES AREAS OF DRYWALL, TYPICALNEW BASEBOARD, TYPICALHOT ROLLED STEEL WALL CLADDING715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18Revision:Date: #: Building Dept.:A-401INTERIOR ELEVATIONSPERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 9A-50111A-50110A-50110A-5019A-50111A-501EQ.1/4"EQ.EQ.1/4"EQ.EQ.EQ.EQ.EQ.4'-0"1/4"1/4"EQ.EQ.4'-0"1/4"1/4"EQ.EQ.7'-1 1/2"2'-3"1"(ALIGN TO EXISTING OPENING HEAD)1'-4 1/2"3/4"1"3/4" SCRIBE1'-6"8'-0"SCALE: 1/2" = 1'-0"1LOBBYWESTEASTNORTH STIPLING INDICATES AREAS OF DRYWALL, TYPICALNEW BASEBOARD, TYPICALHOT ROLLED STEEL WALL CLADDINGSTIPLING INDICATES AREAS OF DRYWALL, TYPICALHOT ROLLED STEEL WALL CLADDINGEXISTING DOOR TO REMAINNEW LOCATION OF HALF GLASS DOORSCALE: 1/2" = 1'-0"3CONFERENCE ROOMNORTH EASTDASHED LINE INDICATES NEW LOCATION OF WATER COOLERNEW BASEBOARD, TYPICALHOT ROLLED STEEL WALL CLADDINGNEW LOCATION OF HALF GLASS DOOR STIPLING INDICATES AREAS OF DRYWALL, TYPICALSOUTHSCALE: 1/2" = 1'-0"4CONFERENCE ROOMWESTWEST 2NEW BASEBOARD, TYPICALHOT ROLLED STEEL WALL CLADDINGHOT ROLLED STEEL WALL CLADDING STIPLING INDICATES AREAS OF DRYWALL, TYPICALWRAP OUTSIDE CORNER WITH SAME WALL MATERIALS, TYP.15" DEEP UPPER CABINETS15" DEEP FIXED SHELFFIXED PANELPRINTER2COPY ROOMWESTSCALE: 1/2" = 1'-0"SCALE: 1/2" = 1'-0"NORTH5LOBBYNEW EXPOSED WF 8x21 BEAM715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18Revision:Date: #: Building Dept.:A-402INTERIOR ELEVATIONSPERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 3'-6 1/2"1/2" x 1/2" x 1/8" HOT ROLLED STEEL ANGLE16 GA. x 48" W x 42" H HOT ROLLED STEEL SHEETEXISTING OR NEW DRYWALLINSULATION NOT SHOWNEXISTING OR NEW STEEL STUDS1/2"4"± 1/4"1/8" x 4" H HOT ROLLED STEEL STRIP (BASE)KERF DRYWALL TO EMBED STEEL ANGLE. CAULK AFTER INSTALLING ANGLEBLACK OXIDE, ROUND WASHER HEAD SCREWS, ATTACH TO STUDSBLACK OXIDE, ROUND WASHER HEAD SCREWS, ATTACH TO STUDS2"INSULATION NOT SHOWN1/4"BLACK OXIDE, ROUND WASHER HEAD SCREWS, ATTACH TO STUDS AT 16" O.C. VERTICALLYEXISTING OR NEW STEEL STUDSEXISTING OR NEW DRYWALL16 GA. x 48" W x 42" H HOT ROLLED STEEL SHEETGAP BETWEEN STEEL SHEETS, PAINT VISIBLE PORTION OF DRYWALL FLAT BLACKBLACK OXIDE, ROUND WASHER HEAD SCREWS, ATTACH TO STUDS AT 16" O.C. VERTICALLYINSULATION NOT SHOWNEXISTING OR NEW STEEL STUDSEXISTING OR NEW DRYWALL16 GA. x 48" W x 42" H HOT ROLLED STEEL SHEET1/2" x 1/2" x 1/8" HOT ROLLED STEEL ANGLETYPICAL INTERIOR WALL 5/8" GYPSUM DRYWALL 3 5/8" STEEL STUDS, OR 2x4 WOOD STUDS, U.O.N. (MATCH EXISTING FRAMING MATERIAL) AT 16" O.C. 5/8" GYPSUM DRYWALL FORMALDEHYDE FREE ACOUSTICAL FIBER BATT INSULATION APPLY CONTINUOUS BEAD OF QUIETSEAL PRO SEALANT AT WALL PERIMETER (INSTALL PER MANUFACTURER'S RECOMMENDATIONS), AT NEW PARTITIONS OF FULLY ENCLOSED OFFICES± 4"MATCH EXISTINGWOOD WINDOW FRAME, MATCH EXISTING, PAINT, TYPICALWOOD WINDOW CASING, PAINT, TYPICALWOOD WINDOW CASING, MATCH EXISTING DOOR FRAME HEAD HEIGHT, PAINT, TYPICALCEILINGCLEAR TEMPERED GLASS, (±1/4" THICK, MATCH EXISTING, TYP.)WOOD WINDOW FRAME, MATCH EXISTING, PAINT, TYPICALCLEAR TEMPERED GLASS, (±1/4" THICK, MATCH EXISTING, TYP .)5/8" DRYWALL, TYPICAL4"WOOD BASE, PAINTCARPETCLEAR TEMPERED GLASS, (±1/4" THICK, MATCH EXISTING, TYP.)WOOD WINDOW MUNTIN, PAINT2"± 2"MATCH EXISTINGWOOD WINDOW FRAME, MATCH EXISTING, PAINT, TYP.WOOD WINDOW CASING, MATCH EXISTING DOOR FRAME JAMB WIDTH, PAINT, TYPICALCLEAR TEMPERED GLASS, (±1/4" THICK, MATCH EXISTING, TYP.)INSULATION NOT SHOWN5/8" DRYWALL, TYPICAL3"1/4"1/4"SOUND INSULATION NOT SHOWN4"5/8" THICK SPACERWOOD DOOR CASING, PAINT, TYPICALWOOD DOOR FRAME AND STOP, MATCH EXISTINGCLEAR TEMPERED GLASS, (±1/4" THICK, MATCH EXISTING, TYP.)HOLLOW METAL DOORWOOD DOOR FRAME AND STOP, MATCH EXISTING HOLLOW METAL DOOR FRAME PROFILE5/8" DRYWALL, TYPICAL± 1/4"2"MATCH EXISTINGWOOD WINDOW CASING, MATCH EXISTING DOOR FRAME JAMB WIDTH, PAINT, TYPICAL1/4"HOLLOW METAL DOORWOOD CASING, PAINT, TYPICAL1/4"1/4"± 4"MATCH EXISTING1/4"4"WOOD WINDOW CASING, MATCH EXISTING DOOR FRAME HEAD HEIGHT, PAINT, TYPICALCEILINGCLEAR TEMPERED GLASS, (±1/4" THICK, MATCH EXISTING, TYP.)1/4"1/4"WOOD DOOR FRAME AND STOP, MATCH EXISTING HOLLOW METAL DOOR FRAME PROFILEHOLLOW METAL DOORWOOD WINDOW FRAME, MATCH EXISTING, PAINT, TYPICALWOOD WINDOW CASING, PAINT, TYPICALWOOD CASING, PAINT, TYPICAL4"PATIO SIDEEXTERIOR SIDE2266NEW EXTERIOR METAL SIDINGEXTERIOR GRADE PLYWOOD SHEATHINGPRIVACY WALL FRAMING (2x STUDS AT 16" O.C.)SHAPED WOOD CAP1/2"FACTORY FINISHED 24 GAUGE GALVANIZED SHEET METAL FLASHING2"2 1/2"HIGH TEMPERATURE ICE & WATER SHIELDSHEET METAL ZEE CLIP/CLOSURE, SAME MATERIAL & COLOR AS METAL ROOFINGCONTINUOUS BEAD OF SEALANT BETWEEN ZEE CLOSURE AND PANEL± 1/4" SHIM± 1/4" SHIM± 1/4" SHIM± 1/4" SHIM± 1/4" SHIM± 1/4"SHIMPATIO SIDEEXTERIOR SIDE26NEW EXTERIOR METAL SIDINGEXTERIOR GRADE PLYWOOD SHEATHINGPRIVACY WALL FRAMING (2x STUDS AT 16" O.C.)COR-A-VENT VENT SYSTEM TWO SV-3 (7/16" x 3" x 48"). ADD SPACERS BETWEEN 48" STRIPS.draindrain26EXISTING BRICK WALL TO REMAINNEW EXTERIOR METAL SIDINGPATIO SIDEEXTERIOR SIDEEXTERIOR GRADE PLYWOOD SHEATHINGPRIVACY WALL FRAMING (2x STUDS AT 16" O.C.)2"1/2"METAL SHEET FLASHING, TYPICALHORIZONTAL FLASHING, OVER VERTICAL FLASHINGFLASHING CORNER± 1/4"SHIMWEATHER RESISTIVE BARRIERWEATHER RESISTIVE BARRIERSTEEL WALL CLADDING(OUTSIDE CORNER)1SCALE: 3" = 1'-0"TYPICAL WALL ASSEMBLY (PLAN VIEW)2SCALE: 3" = 1'-0"INTERIOR WINDOW HEAD3SCALE: 3" = 1'-0"INTERIOR WINDOW SILL5SCALE: 3" = 1'-0"INTERIOR WINDOW MUNTIN4SCALE: 3" = 1'-0"INTERIOR WINDOW HEAD6SCALE: 3" = 1'-0"DOOR HEAD AND TRANSOM7SCALE: 3" = 1'-0"DOOR JAMB8SCALE: 3" = 1'-0"DOOR JAMB AT GLASS WALL9SCALE: 6" = 1'-0"STEEL WALL CLADDING10SCALE: FULL SCALESTEEL WALL CLADDING JOINT11SCALE: FULL SCALE12SCALE: 3" = 1'-0"PRIVACY WALL CAP13SCALE: 3" = 1'-0"PRIVACY WALL BASE14SCALE: 3" = 1'-0"PRIVACY WALL TO BRICK WALL15SCALE: 3" = 1'-0"DETAIL715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18Revision:Date: #: Building Dept.:A-501DETAILSPERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 ± 6'-0"± 3'-0"± 7'-0"± 3'-0"± 7'-0"± 3'-0"± 7'-0"± 3'-0"± 7'-0"± 3'-0"10"LOCATIONMARK TYPE WIDTH HEIGHT THICKNESS MATERIALHARDWARE1 COUNTY ATTORNEYFINISH FRAME FINISH HEAD JAMB SILL COMMENTSDOOR TYPES:DOOR SCHEDULE REV.23 CONFERENCE ROOM45 HALLWAY 2678OFFICETYPE 'A': EXISTING HOLLOW METAL DOOR WITH HALF GLASS TO BE REUSED IN NEW LOCATION.AMETAL (NEW)3'-0" 7'-0" 1 3/4" PRIME & PAINT3'-0" 7'-0" 1 3/4"3'-0" 7'-0" 1 3/4"3'-0" 7'-0" 1 3/4"1 3/4" NOT USEDACMETAL & GLASS PRIME & PAINTSTORAGED 2'-8" 7'-0" 1 3/4"1DOOR TYPESTYPE 'G'SCALE: 1/2" = 1'-0"NOTES:1. FIELD VERIFY ALL EXISTING DOOR SIZES PRIOR TO FRAMING. 2. PRIME AND PAINT ALL DOORS AND FRAMES DARK GRAY OR BLACK (TO BE DETERMINED). 3. PROVIDE DOOR STOPS FOR ALL DOORS TO MATCH EXISTING (REUSE EXISTING WHEREVER FEASIBLE). 4. SALVAGE ALL UNUSED DOORS FOR OWNER REUSE ELSEWHERE. 5. NEW HOLLOW METAL DOOR FRAME. MATCH EXISTING GAUGE, MATERIALS AND DIMENSIONS.TYPE 'B': EXTERIOR GRADE SOLID CORE WOOD FLUSH DOOR CLAD WITH SAME FACTORY FINISHED METAL AS PATIO WALLS.TYPE 'C': EXISTING WOOD FLUSH DOOR TO BE REUSED IN NEW LOCATION.TYPE 'D': NEW HOLLOW METAL FLUSH DOOR TO MATCH EXISTING. TYPE 'E': NEW SINGLE-LITE HOLLOW METAL DOOR TO MATCH EXISTING. USE TEMPERED GLASSFTYPE 'F': NEW HOLLOW METAL DOOR WITH NARROW VISION LITE TO MATCH EXISTING. USE TEMPERED GLASSE WOOD WOODTYPE 'A' TYPE 'F'PRIME & PAINTPRIME & PAINTPRIME & PAINTPRIME & PAINTHARDWARE NOTES:REVERSE HARDWARE FOR NEW DOOR SWINGMETAL & GLASS METALNOT USEDMETAL (NEW) PRIME & PAINTPRIME & PAINTMETAL (NEW)METAL (NEW)ASSISTANT COUNTY ATTORNEY3'-0" 7'-0"METAL & GLASSMETAL (NEW)METAL & GLASSTYPE 'C' & 'D'MANUF.MARKTYPE/MANUF. NO.FRAME WIDTH FRAME HEIGHT R.O. WIDTH R.O. HEIGHT COMMENTSWINDOW SCHEDULEAWINDOW NOTES:WOOD: FIRINTERIOR FINISH: PRIME AND PAINTCLADDING COLOR: HARTFORD GREENWINDOW HARDWARE: BLACK HANNOVER HANDLEDOOR HARDWARE: BLACKSCREENS: SAME AS CLADDING IF ON EXTERIOR; BLACK IF ON INTERIOR.GLAZING: HEAT-SMART D 366 OR AS REQUIRED TO MEET MINIMUM CODE U-FACTOR. BLACK SPACER BARS.1. ALL GLASS SHALL BE SET UP FOR USE AT ALTITUDE OF SITE. PROVIDE BREATHER TUBES, OR EQUIVALENT, FOR SHIPPING OVER MOUNTAIN PASSES.2. MANUFACTURER SHALL PROVIDE INSECT SCREENS FOR ALL OPERABLE WINDOWS.3. GENERAL CONTRACTOR AND WINDOW SUPPLIER SHALL THOROUGHLY REVIEW WINDOW DIMENSIONS, ROUGH OPENING DIMENSIONS AND DETAILING AND NOTIFY ARCHITECT OF ERRORS OR INCONSISTENCIES IN SAME BEFORE PLACING FINAL ORDER.4. WINDOW SUPPLIER SHALL FURNISH SHOP DRAWINGS TO ARCHITECT, FOR APPROVAL, BEFORE FABRICATING.5. ALL OPERATIONS ARE AS VIEWED FROM OUTSIDE.6. TEMPER GLASS TO MEET CODE REQUIREMENTS.7. WHERE FEASIBLE, WINDOW ASSEMBLIES SHALL BE FACTORY MULLED.BCHEAD JAMB SILLREV.LOEWENCUSTOM, SEE COMMENTS ±5'-3" ±2'-6" ±5'-3 3/4" ±2'-6 3/4"AWNING (2) 2'-7 1/2" x 2'-6" AA. SIZE FOR SNUG FIT TO EXISTING OPENING LOEWENLOEWENCUSTOM, SEE COMMENTSCUSTOM, SEE COMMENTS±6'-4 1/2" ±7'-4" ±6'-5 1/4" ±7'-4 3/4" BI-FOLD DOORS (2) 3'-2 1/4" x 7'-4" 2R, SIZE FOR SNUG FIT TO EXISTING OPENING.3'-0" 6'-0" 6'-0 3/4"3'-0 3/4"ROOM FINISH SCHEDULEROOMREVFLOORSMTRL BASENORTHMTRL FIN. MTRL FIN.EASTWALLSSOUTH WESTCEILINGSMTRL FIN. COMMENTSMTRL FIN. MTRL FIN.FILES ROOMRM #ETR & GWB ETR ETR & GWB ETR- -BATHROOMEXECUTIVE LEGAL ASSISTANTLOBBYCONFERENCE ROOMSTORAGESTAIR 1COUNTY ATTORNEYPAINT PAINT PAINTSTORAGEASSISTANT COUNTY ATTORNEYCONCRETE SBBREAK ROOMETR PAINTASSISTANT COUNTY ATTORNEY 2OPEN OFFICEOFFICEASSISTANT COUNTY ATTORNEY 3HALLWAYCONCRETEETRCONCRETECARPETCONCRETECONCRETECONCRETECONCRETEETRCARPETCARPETCARPETCARPETCARPETCARPETCOFFEE ROOMCARPETETRSBSBSBSBSBSBSB- -SBSBSBSBSBSBSBETR & SW PAINT GWB & SW PAINT PAINTETR, GWB & SWETR & ACTPAINT GWBETR ETR ETRETR & SW PAINTETR ETRETR PAINT ETR PAINT ETR PAINT ETR ACT- -PAINTPAINT PAINT PAINT PAINTPAINTETR PAINT ETR PAINT ETR PAINT ETR PAINTETR - - ETR - - ETR - - ETR - - ETR- -ETR PAINT ETR & GWB PAINT ETR PAINT ETR PAINT ETRPAINTETR PAINT ETR PAINT ETR PAINT ETR & GWB ACT- -PAINTETR PAINT ETR, GWB & SWPAINT PAINTETR, GWB & SWETR, GWB & SWPAINT ETR & ACTPAINT GWBETR, GWB & SWPAINT ETR PAINT ETR & GWB PAINT ETRETR PAINT ETR PAINT PAINTETR & GWB PAINT ETR & ACTPAINT GWBETR & GWB PAINT ETR PAINT ETR & ACTPAINT GWBETR PAINT PAINTETR PAINTETR & ACTPAINT GWBPAINTGWBPAINTGWB GWB PAINT ETR & ACTPAINT GWBPAINTGWBETR & GWB PAINT GWB PAINT ETR & ACTPAINT GWBETR PAINTETR PAINT - -- - PAINTGWB PAINTGWB ETR & ACTPAINT GWBPAINTGWB ETR PAINT PAINTETR ETR PAINT- -WOOD- -WOODGENERAL NOTES:1. 2. 3. 4.REMOVE AND REPLACE AS MUCH DRYWALL FINISH AS IS NEEDED TO PROPERLY EXECUTE THE PROPOSED WORK. ALL NEW DRYWALL MUST BLEND SEAMLESSLY WITH EXISTING DRYWALL.. TOUCH-UP/RE-PAINT FINISH ON ALL DOOR FRAMES AND DOORS TO REMAIN TO ACHIEVE A FRESH APPEARANCE. PATCH/REPAIR ANY IMPERFECTIONS/DAMAGE TO EXISTING DRYWALL TO REMAIN AS NEEDED. PAINT ALL EXISTING DRYWALL SURFACES TO REMAIN.NOTES:A. B. C. D.PAINT DRYWALL PORTION OF CEILING. REMOVE EXISTING CARPET IN UPPER LEVEL AND REPLACE WITH NEW CARPET FLOORING THROUGHOUT THE ENTIRE LEVEL. SEE INTERIOR ELEVATIONS FOR STEEL WAINSCOT. LEAVE STEEL BEAM UNFINISHED (MILL STEEL).FINISH MATERIALS SPECIFICATIONSDESCRIPTIONREVSIZE COMMENTSMARKMANUF./MTRL. MANF'R # COLORSB STEEL BASE - - NATURAL STEEL 1/8"D x 4"HCONTRACTOR'S CHOICECLEAR SEALER.NOTES:1. ETR EXISTING TO REMAIN - - - - - -- -PAINT PRIMER AND PAINT PAINT: ULTRA SPEC 500 N 537 PRIMER: ULTRA SPEC 500 N534TBD - -BENJAMIN MOOREGWB NEW GYPSUM WALL BOARD - - - - 5/8"AMERICAN GYPSUMTEXTURE TO MATCH EXISTING. CARPET NEW CARPET TBD TBD - -TBDLOW SHEEN PAINT. SEE NOTE 1 BELOW.PRIMER AND PAINT COATS AND THICKNESSES: LATEX PRIMER WET FILM THICKNESS 4.3 MILS, DRY FILM THICKNESS 1.8 MILS. INTERMEDIATE COAT: WET FILM THICKNESS 4.3 MILS, DRY FILM THICKNESS 1.8 MILS. TOPCOAT: WET FILM THICKNESS 4.3 MILS, DRY FILM THICKNESS 1.8 MILS.CONCRETE EXISTING CONCRETE SLAB - - EXISTING- -GRIND AND POLISH EXISTING CONCRETE SLAB. SEAL.ACT ACOUSTICAL CEILING TILE ASI ARCHITECTURAL STRANDTEC 24" x 24" ADD INTERMEDIATE CEILING GRID COMPONENTS AS NEEDED TO ACCOMODATE NEW CEILING LAYOUTSEALERTBD TBDTBDTBDWOOD WOOD CELING BOARDS TBD TBDVINTAGE WOODSSW HOT ROLLED STEEL WAINSCOT9 PATIOB 3'-0" 6'-0" 1 3/4" METAL (NEW) PRIME AND PAINTMETAL CLADWOODTYPE 'E'ETR & SW PAINTETRPAINTETRETR PAINTETR & SWPAINTETRPAINTETRPAINT- -SEE NOTE C BELOW.SB AT LANDINGS.SEE NOTE D BELOW.- - NATURAL STEELCONTRACTOR'S CHOICECLEAR SEALER.16 GAUGESEE NOTE C BELOW.SEE NOTE C BELOW.VARIOUS COLORS, PROVIDE CHART TO SELECT FROMPROVIDE OPTIONS MEETING ALLOWANCE.TBD FAUX RECLAIMED WOOD.PRIME & PAINTPRIME & PAINTPRIME & PAINTPRIME & PAINT1. NEW HARDWARE SHALL MATCH EXISTING.715 W. Main Street, Suite 104 Aspen, Colorado 81611voice: 970.544.4851 email: LAM@MenendezArchitects.comSheet number:Sheet title:Project:Print Date:Drawn By:LM & MTEAGLE COUNTY ATTORNEY OFFICE REMODEL10/9/18© 2018 Menendez Architects P.C.Issue: Date:REVIEW 07/19/18Revision:Date: #: Building Dept.:A-601SCHEDULESPERMIT/CONST. 10/09/18 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 GREASE WASTE BELOW GRADEINDIRECT WASTENOTE: ALL SYMBOLS SHOWN ON LEGENDARE NOT NECESSARILY USED.WASTE ABOVE GRADEDOMESTIC HOT WATER RECIRC.DOMESTIC HOT WATERDOMESTIC COLD WATERPLUMBING LEGENDMEDIUM PRESSURE NATURAL GASGREASE WASTE ABOVE GRADEWASTE BELOW GRADEGASGMPGVENT THROUGH ROOFCLEAN OUT TO GRADEFLOOR CLEAN OUTWALL CLEAN OUTCLEAN OUTNEWEXISTINGCOWCOFCOCOTG(E)(N)VTRIWVENTCONDENSATE DRAINCUP THROUGH ROOFUTRPIPE RISERPIPE DROPPIPE TAKEOFF (FROM BOTTOM OF MAIN)PIPE TAKEOFF (FROM TOP OF MAIN)PIP END CAPPIPE CONTINUATIONPIPE EXPANSION GUIDEPIPE UNIONPIPE ANCHORFLEXIBLE PIPE CONNECTIONPIPE EXPANSION JOINTPOINT OF NEW CONNECTIONAIR VENTPLUG VALVECHECK VALVEBALL VALVEBALANCING VALVEBUTTERFLY VALVEPRESSURE REDUCING VALVESTRAINERPRESSURE - TEMP. TAPPRESSURE GAUGE2-WAY CONTROL VALVE3-WAY CONTROL VALVE4-WAY CONTROL VALVEFLOW REGULATOR VALVEDIFFERENTIAL BYPASS VALVENATURAL GAS PRESSURE REGULATORTHERMOMETERUPUPDOWNDNPLUMBING SPECIFICATIONS:1. GENERAL:a. FURNISH ALL LABOR, SUPERVISION, MATERIALS, EQUIPMENT AND FACILITIESNECESSARY TO FURNISH, FABRICATE, DELIVER, STORE AND INSTALL ALL WORK NOTEDON THE DRAWINGS AND/OR SPECIFIED HEREIN.b. THE CONTRACTOR SHALL FURNISH AND INSTALL ALL WORK NECESSARY TO MAKE ACOMPLETE SYSTEM WHETHER OR NOT SUCH DETAILS ARE MENTIONED IN THESESPECIFICATIONS OR SHOWN ON THE PLANS, BUT WHICH ARE OBVIOUSLY NECESSARYTO MAKE A COMPLETE SYSTEM, EXCEPTING ONLY THOSE PORTIONS THAT ARESPECIFICALLY MENTIONED HEREIN OR PLAINLY MARKED ON THE ACCOMPANYINGDRAWINGS AS BEING INSTALLED UNDER ANOTHER SECTION OF THE SPECIFICATIONS.2. WORKMANSHIP:a. THE WORK SHALL BE ACCOMPLISHED IN A THOROUGH AND WORKMAN-LIKE MANNERSATISFACTORY TO AND MEETING THE APPROVAL OF THE OWNER AND ARCHITECT.3. MATERIALS:a. ALL MATERIALS AND EQUIPMENT SHALL BE NEW AND THE BEST OF THEIR RESPECTIVEKIND, FREE FROM ALL DEFECTS AND OF THE MAKE AND QUALITY SPECIFIED.4. SITE INSPECTION:a. CONTRACTOR SHALL VISIT THE SITE OF WORK PRIOR TO SUBMISSION OF HIS BID ANDTHOROUGHLY FAMILIARIZE HIMSELF WITH THE WORKING CONDITIONS & EXACT NATUREOF THE WORK.b. SUBMISSION OF A BID ACKNOWLEDGES FULL RESPONSIBILITY FOR FURNISHING ACOMPLETE AND FUNCTIONAL SYSTEM.c. NO CHANGES IN CONTRACT WILL BE MADE TO ACCOMMODATE OR ALLOW EXTRA FUNDSFOR ANY OMISSION WHICH RESULTS FROM A FAILURE TO THOROUGHLY MAKE THEEXAMINATION.5. CODES AND PERMITS:a. ALL PLUMBING EQUIPMENT, INSTALLATION, ETC., SHALL CONFORM TO THE 2015INTERNATIONAL PLUMBING CODE (IPC), 2015 INTERNATIONAL ENERGY CONSERVATIONCODE (IECC) AND ORDINANCES AS INTERPRETED BY THE COUNTY OF EAGLE BUILDINGDEPARTMENT.b. CONTRACTOR SHALL OBTAIN AND PAY FOR ALL PERMITS AND INSPECTIONS.c. COPIES OF ALL PERMITS AND INSPECTION REPORTS SHALL BE SUBMITTED TO THEARCHITECT.6. AS-BUILTS:a. CONTRACTOR SHALL PROVIDE A COMPLETE SET OF AS-BUILT DOCUMENTS WITH ALLCHANGES NOTED THEREON AT THE COMPLETION OF THE PROJECT AND PRIOR TO FINALACCEPTANCE AND PAYMENT.7. GUARANTEE:a. CONTRACTOR SHALL UNCONDITIONALLY GUARANTEE ALL LABOR AND MATERIALS ONALL WORK AGAINST DEFECTS IN WORKMANSHIP AND MATERIALS FOR A PERIOD OF ONEYEAR AFTER COMPLETION.8. SUBMITTALS:a. CATALOG INFORMATION AND CUTS OF ALL EQUIPMENT AND DEVICES SHALL BESUBMITTED TO THE ARCHITECT FOR REVIEW (SIX COPIES OF EACH). ELECTRONICSUBMITTALS PREFERRED.9. COORDINATION:a. THE DRAWINGS ARE DIAGRAMMATIC AND INTENDED TO SHOW SCOPE.b. THE CONTRACTOR SHALL COORDINATE HIS WORK WITH OTHER TRADES TO PROVIDEBEST ARRANGEMENT OF ALL DUCTS, PIPES, CONDUIT, ETC.10. CUTTING AND PATCHING:a. ALL CUTTING AND PATCHING REQUIRED OF THE STRUCTURE (NEW OR EXISTING) SHALLBE PROVIDED UNDER OTHER SECTIONS OF THE WORK.b. PROVIDE NECESSARY REQUIREMENTS TO THE PROJECT SUPERINTENDENT.c. X-RAY SLABS PRIOR TO CORING.11. CLEANUP:a. UPON COMPLETION OF THE WORK UNDER THIS SECTION, THE CONTRACTOR SHALLREMOVE ALL SURPLUS MATERIALS, EQUIPMENT AND DEBRIS INCIDENTAL TO THIS WORKAND LEAVE THE PREMISES CLEAN AND ORDERLY.12. PLUMBING IDENTIFICATIONa. EQUIPMENT NAMEPLATES: METAL, WITH DATA ENGRAVED OR STAMPED, FORPERMANENT ATTACHMENT ON EQUIPMENT.b. PIPE MARKERS: PREPRINTED, COLOR CODED, WITH LETTERING INDICATING SERVICE,AND SHOWING DIRECTION OF FLOW.c. VALVE TAGS: STAMPED OR ENGRAVED WITH 1/4" LETTERS FOR PIPING SYSTEMABBREVIATION AND 1/2" NUMBERS, WITH NUMBERING SCHEME. PROVIDE 5/32" HOLEFOR FASTENER.d. VALVE TAG SCHEDULE: PREPARE A VALVE TAG SCHEDULE TO BE SUBMITTED TO THEMAINTENANCE ENGINEER FOR RECORD.13. PIPE INSULATION:a. DOMESTIC WATER PIPING INSULATION SHALL HAVE A THERMAL CONDUCTIVITY LESSTHAN OR EQUAL TO 0.27 BTU-IN/HR-FT2-°F.b. HOT & COLD WATER SUPPLY PIPING (EXCEPT RUN OUTS 12 FT. OR SHORTER TOINDIVIDUAL FIXTURES) SHALL BE INSULATED AS FOLLOWS:PIPE SIZE (IN.) INSULATION THICKNESS (IN.)1/2", 3/4", 1" & 1 1/4" 1"1 1/2" THROUGH 6" 1 1/2"c. NO HOT OR COLD WATER PIPING SHALL BE ROUTED IN EXTERIOR WALLS UNLESSPROPERLY INSULATED.d. CONDENSATE PIPING SHALL BE INSULATED WITH 3/8" FOAM PLASTIC.e. STORM DRAIN PIPING SHALL BE INSULATED WITH FIBERGLASS INSULATION FROM THEUNDERSIDE OF THE DECK TO THE VERTICAL RISER.14. PIPING:a. WASTE, VENT AND STORM DRAIN PIPING:i. SHALL BE STANDARD WEIGHT CAST IRON HUB LESS TYPE.ii. UNDERGROUND PIPING CAN ALSO BE SCHEDULE 40 PVC.b. WATER PIPING:i. SHALL BE TYPE "L" COPPER HARD DRAWN WITH WROUGHT COPPER FITTINGS.ii. JOINTS SHALL BE SOLDERED WITH 95-5 OR SILVER SOLDER.iii.WATER PIPING 1 1/4” & SMALLER CAN ALSO BE UPONOR AQUAPEX APR, REHAU RAUPEXOR EQUIVILANT-PROVIDE DEDUCT ALTERNATE PRICING.iv. UNLESS OTHERWISE NOTED, ALL WATER PIPE SIZING IS BASED UPON COPPER. IF ASTMAPPROVED PEX IS UTILIZED, UPSIZE ONE NOMINAL SIZE FROM THAT SHOWN ON PLANS.15. EACH PLUMBING VENT SHALL TERMINATE NOT LESS THAN TEN FEET FROM ANY MECHANICALINTAKE AND AT LEAST THREE FEET FROM ANY OPENING INTO THE BUILDING.16. VERIFY INVERT ELEVATION OF WASTE LINE IN STREET PRIOR TO ROUTING ANY PIPING. PROVIDESEWAGE WASTE EJECTOR IF I.E. OF EXISTING SANITARY WASTE CAN NOT BE ACCOMMODATED.17. CLEAN-OUTS SHALL BE INSTALLED AS PER 2015 IPC SECTION 708.18. PROVIDE WATERTIGHT FLASHING WHEREVER PIPES PASS THRU EXTERIOR WALLS, ROOF ANDFLOORS.19. PENETRATION IN WALLS REQUIRING PROTECTED OPENINGS SHALL BE FIRE-STOPPED.FIRE-STOPPING SHALL BE AN APPROVED MATERIAL SECURELY INSTALLED AND CAPABLE OFMAINTAINING ITS INTEGRITY WHEN SUBJECTED TO TEST TEMPERATURE FOR SPECIFIC WALL ORPARTITION.20. PROVIDE FELT WITH METAL BACKING VIBRATION ISOLATION SLEEVES OR PADS AT ALL PIPEHANGERS OR SUPPORTS AND ALL POINTS WHERE PIPING COMES IN CONTACT WITH ANYPORTION OF THE STRUCTURE. APPLIES TO ALL WATER AND WASTE PIPING.21. LOCATIONS OF UTILITIES SHOWN ARE APPROXIMATE. CONTRACTOR SHALL VERIFY EXACTLOCATIONS AND DEPTHS OF UTILITIES PRIOR TO STARTING WORK OF THIS SECTION. MAKEREQUIRED ADJUSTMENTS TO CONNECT TO EXISTING UTILITIES. IF INDICATED POINTS OFCONNECTION CANNOT BE MADE TO UTILITIES AS FOUND, THE CONTRACTOR SHALL, BEFORECONTINUING, NOTIFY THE ARCHITECT PRIOR TO INSTALLING ANY WORK WHICH MAY BEAFFECTED.22. IT SHALL BE THE CONTRACTORS RESPONSIBILITY TO VERIFY AVAILABLE SPACES FORINSTALLING THE WORK.23. VALVES SHALL BE NIBCO, JENKINS, WALWORTH, STOCKHAM OR EQUAL. SERVICE PRESSURESHALL BE SUITABLE FOR SERVICE INTENDED.24. PROVIDE HANGERS AND SUPPORTS MEETING THE REQUIREMENTS SPECIFIED IN THE 2015 IPCSECTION 308. PLUMBERS TAPE AND WIRE ARE NOT ACCEPTABLE.25. CONTRACTOR SHALL AFFIX A MAINTENANCE LABEL TO ALL EQUIPMENT REQUIRING ROUTINEMAINTENANCE AND SHALL PROVIDE THREE COPIES OF MAINTENANCE AND OPERATING MANUALSTO THE OWNER/OPERATOR.26. CONTRACTOR SHALL ARRANGE FOR AND PAY FOR ALL UTILITY METERS AND UTILITYCONNECTIONS.27. ALL PLUMBING LINES SHALL BE CONCEALED WITHIN THE BUILDING STRUCTURE TO THEGREATEST EXTENT POSSIBLE. ALL LINES NOT CONCEALED SHALL BE SECURED 6" OFF FLOORAND 3/4" FROM WALL AND CEILINGS USING OFFSET BRACKETS.28. AN APPROVED BACKFLOW PREVENTER SHALL BE PROPERLY INSTALLED UPSTREAM OF ANYPOTENTIAL HAZARD BETWEEN THE POTABLE WATER SUPPLY AND A SOURCE OFCONTAMINATION.29. ALL SINGLE AND THREE PHASE MOTORS, STARTERS AND DISCONNECTS SHALL BE PROVIDED BYTHE PLUMBING CONTRACTOR AND WIRED BY THE ELECTRICAL CONTRACTOR.ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMITDocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 GENERAL NOTES:1. OFFSET PIPING AS REQUIRED TO AVOID ALL DUCTWORK, LIGHTS, ANDSTRUCTURE. COORDINATE ALL STRUCTURAL PENETRATIONS WITH THESTRUCTURAL ENGINEER.2. ALL PIPING PASSING THROUGH FIRE-RATED ASSEMBLIES SHALL INCLUDEA FIRE-RATED PIPE SEALANT RATED TO MATCH THAT OF THE ASSEMBLY.3. INSTALL CLEANOUTS PER SECTION 708 OF THE IPC. NOT ALL REQUIREDCLEANOUTS NECESSARILY SHOWN. COORDINATE ALL FINAL LOCATIONSWITH THE ARCHITECT PRIOR TO INSTALLATION.SHEET DETAIL NOTES:CONNECT 12" CW, 12" HW, 1-12" W & 1-12" V TO BS.CONNECT NEW 12"CW AND 12" HW TO EXISTING CW & HW. CONTRACTORTO ENSURE EXISTING CW & HW LINES ARE A MINIMUM 12".CONNECT NEW 1-12" W TO TOP OF EXISTING WASTE. CONTRACTOR TOENSURE EXISTING WASTE LINE IS A MINIMUM OF 1-12".CONNECT NEW 1-12" V TO EXISTING VENT. CONTRACTOR TO ENSUREEXISTING VENT IS A MINIMUM OF 1-12".P-1 TO BE LOCATED IN CABINET BELOW BS. CONTRACTOR TO ENSUREP-1 IS LOCATED AS TO BE ACCESSED FOR SERVICE AND MAINTENANCETHROUGH CABINET1P11-1/2" W(PRESSURIZED)1-1/2" W1-1/2" VEXISTINGSINK TO BEREMOVED1/2" CW1/2" HWBS123423455ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMIT NORTHMAIN LEVEL PLUMBING PLANSCALE: 1/4" = 1'0"DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 RADIANT FLOOR SUPPLYRADIANT FLOOR RETURNNOTE: ALL SYMBOLS SHOWN ON LEGENDARE NOT NECESSARILY USED.CHILLED WATER RETURNCHILLED WATER SUPPLYHEATING WATER RETURNHEATING WATER SUPPLYMECHANICAL LEGENDMEDIUM PRESSURE NATURAL GASSNOWMELT RETURNSNOWMELT SUPPLYGASHWSTABHWRCWSCWRSMSSMRRFSRFRGMPGPIPE RISERPIPE DROPPIPE TAKEOFF (FROM BOTTOM OF MAIN)PIPE TAKEOFF (FROM TOP OF MAIN)PIP END CAPPIPE CONTINUATIONPIPE EXPANSION GUIDEPIPE UNIONPIPE ANCHORFLEXIBLE PIPE CONNECTIONPIPE EXPANSION JOINTPOINT OF NEW CONNECTIONAIR VENTPLUG VALVECHECK VALVEBALL VALVEBALANCING VALVEBUTTERFLY VALVEPRESSURE REDUCING VALVESTRAINERPRESSURE - TEMP. TAPPRESSURE GAUGE2-WAY CONTROL VALVE3-WAY CONTROL VALVESUPPLY GRILLERETURN GRILLEEXHAUST AIRSUPPLY AIRRETURN AIROUTDOOR AIRSUPPLY AIR DAMPERRETURN AIR DAMPERSUPPLY DIFFUSEROARASAEARADSADSGRGSDRETURN DIFFUSERRDTRANSFER GRILLETGTRANSFER DIFFUSERTDTHERMOSTATFIRE/SMOKE DAMPERFIRE DAMPERMOTOR OPERATED DAMPER (MOD)MANUAL BALANCING DAMPERTURNING VANES IN 90° ELBOW??x??DUCT SIZES ARE NET FREE AREA1ST NO. IS DUCT WIDTH.2ND NO. IS DUCT DEPTH.SECTION THRU SUPPLY AIR DUCTSECTION THRU RETURN/EXHAUST AIR DUCTSUPPLY DUCT TURN DOWNRETURN/EXHAUST DUCT TURN DOWNCHANGE OF ELEVATIONFLEXIBLE DUCT CONNECTIONR/D(D) DROP (R) RISESENSOR (CALL OUT ON DRAWINGS)SUPPLY REGISTER/DIFFUSER/LOUVERNECK SIZECFM-SRETURN REGISTER/DIFFUSER/LOUVERNECK SIZECFM-ROUTSIDE AIR REGISTER/DIFFUSER/LOUVERNECK SIZECFM-O.A.EXHAUST REGISTER/DIFFUSER/LOUVERNECK SIZECFM-EUDOOR UNDERCUT CFM(A) SECTION CUT LINE(B) SHEET SHOWN ONSSECTION THRU ROUND DUCTROUND DUCT TURN DOWN4-WAY CONTROL VALVEFLOW REGULATOR VALVEDIFFERENTIAL BYPASS VALVENATURAL GAS PRESSURE REGULATORTHERMOMETERMMECHANICAL SPECIFICATIONS:1. GENERAL:a. FURNISH ALL LABOR, SUPERVISION, MATERIALS, EQUIPMENT AND FACILITIESNECESSARY TO FURNISH, FABRICATE, DELIVER, STORE AND INSTALL ALL WORK NOTEDON THE DRAWINGS AND/OR SPECIFIED HEREIN.b. THE CONTRACTOR SHALL FURNISH AND INSTALL ALL WORK NECESSARY TO MAKE ACOMPLETE SYSTEM WHETHER OR NOT SUCH DETAILS ARE MENTIONED IN THESESPECIFICATIONS OR SHOWN ON THE PLANS, BUT WHICH ARE OBVIOUSLY NECESSARYTO MAKE A COMPLETE SYSTEM, EXCEPTING ONLY THOSE PORTIONS THAT ARESPECIFICALLY MENTIONED HEREIN OR PLAINLY MARKED ON THE ACCOMPANYINGDRAWINGS AS BEING INSTALLED UNDER ANOTHER SECTION OF THE SPECIFICATIONS.2. WORKMANSHIP:a. THE WORK SHALL BE ACCOMPLISHED IN A THOROUGH AND WORKMAN-LIKE MANNERSATISFACTORY TO AND MEETING THE APPROVAL OF THE OWNER AND ARCHITECT.3. MATERIALS:a. ALL MATERIALS AND EQUIPMENT SHALL BE NEW AND THE BEST OF THEIR RESPECTIVEKIND, FREE FROM ALL DEFECTS AND OF THE MAKE AND QUALITY SPECIFIED.4. SITE INSPECTION:a. CONTRACTOR SHALL VISIT THE SITE OF WORK PRIOR TO SUBMISSION OF HIS BID ANDTHOROUGHLY FAMILIARIZE HIMSELF WITH THE WORKING CONDITIONS & EXACT NATUREOF THE WORK.b. SUBMISSION OF A BID ACKNOWLEDGES FULL RESPONSIBILITY FOR FURNISHING ACOMPLETE AND FUNCTIONAL SYSTEM.c. NO CHANGES IN CONTRACT WILL BE MADE TO ACCOMMODATE OR ALLOW EXTRA FUNDSFOR ANY OMISSION WHICH RESULTS FROM A FAILURE TO THOROUGHLY MAKE THEEXAMINATION.5. CODES AND PERMITS:a. ALL MECHANICAL EQUIPMENT, INSTALLATION, ETC., SHALL CONFORM TO THE 2015INTERNATIONAL MECHANICAL CODE (IMC), 2015 INTERNATIONAL ENERGYCONSERVATION CODE (IECC) AND ORDINANCES AS INTERPRETED BY THE COUNTY OFEAGLE BUILDING DEPARTMENT.b. CONTRACTOR SHALL OBTAIN AND PAY FOR ALL PERMITS AND INSPECTIONS.c. COPIES OF ALL PERMITS AND INSPECTION REPORTS SHALL BE SUBMITTED TO THEARCHITECT.6. AS-BUILTS:a. CONTRACTOR SHALL PROVIDE A COMPLETE SET OF AS-BUILT DOCUMENTS WITH ALLCHANGES NOTED THEREON AT THE COMPLETION OF THE PROJECT AND PRIOR TO FINALACCEPTANCE AND PAYMENT.7. GUARANTEE:a. CONTRACTOR SHALL UNCONDITIONALLY GUARANTEE ALL LABOR AND MATERIALS ONALL WORK AGAINST DEFECTS IN WORKMANSHIP AND MATERIALS FOR A PERIOD OF ONEYEAR AFTER COMPLETION.8. SUBMITTALS:a. CATALOG INFORMATION AND CUTS OF ALL EQUIPMENT AND DEVICES (WITH ALLOPTIONS CLEARLY MARKED) SHALL BE SUBMITTED TO THE ARCHITECT FOR REVIEW (SIXCOPIES OF EACH). ELECTRONIC SUBMITTALS PREFERRED. PERFORMANCE SELECTIONSREQUIRED FOR VAV BOXES.9. COORDINATION:a. THE DRAWINGS ARE DIAGRAMMATIC AND INTENDED TO SHOW SCOPE.b. THE CONTRACTOR SHALL COORDINATE HIS WORK WITH OTHER TRADES TO PROVIDEBEST ARRANGEMENT OF ALL DUCTS, PIPES, CONDUIT, ETC.10. CUTTING AND PATCHING:a. ALL CUTTING AND PATCHING REQUIRED OF THE STRUCTURE (NEW OR EXISTING) SHALLBE PROVIDED UNDER OTHER SECTIONS OF THE WORK.b. PROVIDE NECESSARY REQUIREMENTS TO THE PROJECT SUPERINTENDENT.c. X-RAY SLABS PRIOR TO CORING.11. CLEANUP:a. UPON COMPLETION OF THE WORK UNDER THIS SECTION, THE CONTRACTOR SHALLREMOVE ALL SURPLUS MATERIALS, EQUIPMENT AND DEBRIS INCIDENTAL TO THIS WORKAND LEAVE THE PREMISES CLEAN AND ORDERLY.12. MECHANICAL IDENTIFICATIONa. EQUIPMENT NAMEPLATES: METAL, WITH DATA ENGRAVED OR STAMPED, FORPERMANENT ATTACHMENT ON EQUIPMENT.b. PIPE MARKERS: PREPRINTED, COLOR CODED, WITH LETTERING INDICATING SERVICE,AND SHOWING DIRECTION OF FLOW.c. VALVE TAGS: STAMPED OR ENGRAVED WITH 1/4" LETTERS FOR PIPING SYSTEMABBREVIATION AND 1/2" NUMBERS, WITH NUMBERING SCHEME. PROVIDE 5/32" HOLEFOR FASTENER.d. VALVE TAG SCHEDULE: PREPARE A VALVE TAG SCHEDULE TO BE SUBMITTED TO THEMAINTENANCE ENGINEER FOR RECORD.13. DUCTWORK:a. DUCTWORK SHALL BE FABRICATED AND INSTALLED IN ACCORDANCE WITH THE 2015 IMCAND SMACNA STANDARDS.b. DUCTWORK SHALL BE GALVANIZED STEEL GAUGES TO MEET SMACNA STANDARDS.DUCTWORK SIZES INDICATED ARE INSIDE TO INSIDE [OUTSIDE TO OUTSIDE]DIMENSIONS.c. ALL DUCT JOINTS SHALL BE SEALED AIR TIGHT WITH RCD CORP. # 6 MASTIC ADHESIVEWITH VERSA GRIP OR MESH.d. ALL FINAL CONNECTIONS TO SUPPLY GRILLES SHALL BE COMPLETED WITH ACOUSTICALFLEXIBLE DUCT UNLESS OTHERWISE NOTED ON THE PLANS. MINIMUM LENGTH IS 3',MAXIMUM LENGTH IS 5'.e. FLEXIBLE DUCT USED FOR CONDITIONED AIR SHALL BE UL APPROVED, VINYL COATED,WIRE REINFORCED FIBERGLASS, WITH MAXIMUM THERMAL CONDUCTIVITY OF 0.30BTU-IN/HR-FT2-°F AND A MAXIMUM LENGTH OF FIVE FEET.f. DUCTWORK SHALL BE SIZED AT A MAXIMUM VELOCITY OF 1,000 FPM/.08" PRESSUREDROP PER 100 FEET.g. EACH MECHANICAL VENTILATION SYSTEM (SUPPLY AND/OR EXHAUST) SHALL BEEQUIPPED WITH A MEANS OF SHUT-OFF WHEN VENTILATION IS NOT REQUIRED, ANDBACKDRAFT DAMPERS WHICH CAN BE CLOSED ON FAN SHUTDOWN SHALL BE PROVIDEDFOR AIR INTAKES AND/OR DISCHARGES.h. CLEAN OUT ALL DUCTS PRIOR TO SUPPLY AND RETURN GRILLE INSTALLATIONi. DOUBLE THICKNESS TURNING VANES SHALL BE USED ON ALL DUCT TURNS OF 90°.14. HEATING PIPING:a. HEATING HOT WATER PIPING 2½” INCHES AND BELOW SHALL BE TYPE "L" COPPER, HARDDRAWN, WITH WROUGHT COPPER SWEAT FITTINGS. JOINTS SHALL BE SOLDERED WITH95-5 OR SILVER SOLDER. CONDENSER WATER AND HEATING HOT WATER PIPING 3" ANDABOVE SHALL BE SCHEDULE 40 BLACK STEEL A-53 SEAMLESS PIPE WITH WELDEDFITTINGS.b. VALVES SHALL BE DANFOSS OR EQUAL; SERVICE PRESSURE SHALL BE AS REQUIRED.VALVES SHALL BE SUITABLE FOR SERVICE INTENDED. PROVIDE PRESSUREINDEPENDENT CONTROL VALVE MODELS FOR ALL VARIABLE SPEED SYSTEMS UNLESSNOTED OTHERWISE.c. PROVIDE HANGERS, SUPPORTS AND INSULATION SADDLES AS REQUIRED AND PER ANSIREQUIREMENTS. PLUMBERS TAPE AND WIRE ARE NOT ACCEPTABLE.d. PIPING SHALL BE SIZED AT A MAXIMUM PRESSURE DROP OF 3.5 FT PER 100 FEET & 4FEET/SEC VELOCITY. UNLESS OTHERWISE NOTED, ALL PIPING SHOWN ON PLANS HASBEEN SIZED FOR COPPER. PROVIDE DEDUCT ALTERNATE PRICING FOR PEX. IF PEX ISUSED, UPSIZE PIPE BY 1 NOMINAL SIZE.e. CONTROL VALVE Cv RATINGS SHALL BE SELECTED AT A MAXIMUM PRESSUREDIFFERENTIAL ACROSS THE VALVE OF 2 PSI.f. PROVIDE 3” DIA. x 24" L SCHEDULE 40 PVC INLINE FILTER FILLED WITH LIMESTONEAGGREGATE TO NEUTRALIZE THE BOILER'S CONDENSATE DRAIN.g. PROVIDE EXPANSION JOINTS OR LOOPS ON ALL HEATING WATER PIPING RUNS INEXCESS OF 50'.15. DUCTWORK INSULATION:a. ALL DUCTWORK SHALL BE INSULATED CONSISTENT WITH THE REQUIREMENTS PERSECTION 604 OF THE 2015 IMC.b. INSULATION SHALL BE UL LISTED IN COMPLIANCE WITH A FLAME-SPREAD INDEX NOTMORE THAN 25 AND SMOKE DEVELOPED INDEX NOT MORE THAN 50, PER SECTION 604.3OF THE 2015 IMC. INSTALLATION SHALL BE IN ACCORDANCE WITH IMC REQUIREMENTS.c. RECTANGULAR SUPPLY, RETURN & TRANSFER DUCTWORK SHALL BE INTERNALLY LINEDWITH A VAPOR RESISTANT DUCT LINER OF THICKNESSES SPECIFIED BELOW.d. CONCEALED ROUND, CONCEALED OVAL & OUTDOOR AIR DUCTS SHALL BE EXTERNALLYWRAPPED WITH FIBERGLASS INSULATION WITH AN EXTERNAL VAPOR BARRIER.REQUIRED R-VALUES ARE SPECIFIED BELOW.e. ALL SUPPLY, RETURN & TRANSFER DUCTWORK LOCATED WITHIN THE BUILDINGENVELOPE SHALL BE INSULATED TO A MINIMUM OF R-4 (1” LINER) UNLESS SPECIFIEDOTHERWISE ON THE PLANS.f. ALL SUPPLY & RETURN DUCTWORK SHALL BE INSULATED TO A MINIMUM OF R-6 (1-1/2”LINER) WHEN LOCATED IN UNCONDITIONED SPACES AND SHALL BE INSULATED TO AMINIMUM OF R-12 (3” LINER) AND WEATHERPROOFED WHEN LOCATED OUTSIDE THEBUILDING.g. ALL OUTDOOR AIR DUCTS SHALL BE INSULATED TO A MINIMUM OF R-6 WITH A VAPORBARRIER.16. PIPING INSULATION:a. ALL HYDRONIC PIPING SHALL BE INSULATED CONSISTENT WITH THE REQUIREMENTSPER SECTION 1204 OF THE 2015 IMC.b. ALL EXPOSED PIPING SHALL UTILIZE FIBERGLASS INSULATION WITH VAPOR BARRIER,WHEREVER ARMAFLEX IS USED, IT MUST BE FIELD TAPED ALONG BOTH LONGITUDINALAND RADIAL SEAMS. SELF-ADHEARING ALONE IS NOT ACCEPTABLE.c. INSULATION SHALL BE UL LISTED IN COMPLIANCE WITH A FLAME-SPREAD INDEX NOTMORE THAN 25 AND SMOKE DEVELOPED INDEX NOT MORE THAN 450, PER SECTION 1204OF THE 2015 IMC. INSTALLATION SHALL BE IN ACCORDANCE WITH IMC REQUIREMENTS.d. ALL HYDRONIC PIPING INSULATION SHALL HAVE A THERMAL CONDUCTIVITY LESS THANOR EQUAL TO 0.27 BTU-IN/HR-FT2-°F.e. ALL HEATING WATER PIPING SMALLER THAN 1-1/2" SHALL BE INSULATED WITH 1-1/2”THICKNESS. HEATING WATER PIPING 1-1/2” OR LARGER SHALL BE INSULATED WITH 2”THICKNESS.f. ALL CHILLED WATER PIPING SMALLER THAN 1-1/2" SHALL BE INSULATED WITH 1/2”THICKNESS. CHILLED WATER PIPING 1-1/2” OR LARGER SHALL BE INSULATED WITH 1”THICKNESS..g. ALL PIPING ROUTED BELOW THE SLAB UNDERGROUND SHALL BE TYPE "K" COPPER ANDSHALL BE INSULATED WITH ARMIFLEX TYPE INSULATION.17. TEMPERATURE CONTROL DEVICES:a. CONTRACTOR SHALL PROVIDE CONTROLS CAPABLE OF MEETING THE SEQUENCE OFOPERATION DESCRIBED ON SHEET M1.0.b. MECHANICAL CONTRACTOR TO COORDINATE ALL REQUIREMENTS WITH UNITMANUFACTURERS PRIOR TO PURCHASING.c. THE HVAC SYSTEM SHALL BE PROVIDED WITH 7-DAY PROGRAMMABLE AUTOMATICSPACE TEMPERATURE CONTROL DEVICES (THERMOSTATS) AS SHOWN ON THE PLANS.THE THERMOSTATS SHALL BE CAPABLE OF SCHEDULING OCCUPANCIES AND PROVIDINGSETBACK CAPABILITIES TO MAINTAIN ZONE SETPOINTS DOWN TO 55°F OR UP TO 85°F.d. CONTROLS SHALL BE CAPABLE OF PROVIDING A DEADBAND OF AT LEAST 5°F BETWEENHEATING AND COOLING.e. THERMOSTATS SHALL HAVE NUMERIC SET POINTS IN °F, ADJUSTABLE SETPOINT STOPS,AND SHALL BE MOUNTED AT 46" ABOVE FINISHED FLOOR ADJACENT TO THE ROOM'SLIGHT SWITCH.f. COORDINATE CONTROL TIE-INS WITH CONTROLS CONTRACTOR AS NECESSARY.g. ALL THERMOSTATS SHALL BE APPROVED BY THE OWNER.18. WATER QUALITY:a. HEATING AND CHILLED WATER CONDITIONS SHALL BE WITHIN HARDNESS AND PHRANGE SUITABLE FOR MECHANICAL EQUIPMENT (PER MANUFACTURER). CONTRACTORTO TEST CONDITIONS PRIOR TO SYSTEM FILL. WATER SOFTENERS OR OTHER DEVICESMAY BE REQUIRED TO IMPROVE WATER QUALITY.b. INCLUDE CORROSION INHIBITORS ON ALL PROPYLENE GLYCOL MIXTURES.c. PRIOR TO SYSTEM FILL, ALL TUBING SYSTEMS AND MANIFOLDS SHALL BE CLEANED ASPRESCRIBED BY THE TUBING MANUFACTURER. SUPPLY ALL TOOLS, CONNECTIONS,LABOR, AND ACCESSORIES NECESSARY TO PROPERLY REMOVE ALL FOREIGNMATERIAL, CHEMICAL, AND RESIDUE WITHIN THE TUBING SYSTEM BEFOREPERMANENTLY CHARGING THE SYSTEM AND PLACING INTO OPERATION.19. BEFORE STARTING ANY WORK, THE CONTRACTOR FOR THIS SECTION OF THE WORK SHALLEXAMINE A COMPLETE SET OF DRAWINGS FOR ALL TRADES, INCLUDING ARCHITECTURAL,STRUCTURAL, HVAC, ELECTRICAL, FIRE PROTECTION AND PLUMBING. DIMENSIONS, SPACEREQUIREMENTS AND POINTS OF CONNECTION TO ALL EQUIPMENT SHALL BE VERIFIED, AND ANYMINOR ADJUSTMENTS NECESSARY TO AVOID CONFLICT WITH THE BUILDING STRUCTURE ANDTHE WORK OF THE OTHER TRADES SHALL BE MADE. CONTRACTOR SHALL NOTIFY ARCHITECTIMMEDIATELY IF ANY MAJOR CONFLICTS OCCUR.20. COORDINATE LOCATIONS OF ALL ROOF AND EXTERIOR WALL OPENINGS WITH ALL RELEVANTTRADES, AND PROVIDE WATERTIGHT FLASHINGS WHEREVER PENETRATIONS OCCUR. EXACTLOCATIONS AND SIZES MAY BE DEPENDENT UPON EQUIPMENT SELECTIONS; COORDINATE SIZESAND LOCATIONS OF ALL OPENINGS WITH APPROPRIATE EQUIPMENT REQUIREMENTS.21. PERMANENT ACCESS TO EQUIPMENT SHALL BE PROVIDED, AND A MINIMUM OF 30" CLEARWORKING SPACE IN FRONT OF ACCESS PANELS TO THE COMPRESSOR, BLOWER ASSEMBLY ANDAIR FILTER SECTION OF THE EQUIPMENT SHALL BE PROVIDED BY GENERAL CONTRACTOR.22. ALL EQUIPMENT SHALL BE SECURELY FASTENED TO THE BUILDING STRUCTURE WITH CODEAPPROVED VIBRATION ISOLATORS.23. EACH PIECE OF EQUIPMENT AND ALL SYSTEMS SHALL BE ADJUSTED AND RE-ADJUSTED TOINSURE PROPER FUNCTION OF ALL CONTROLS, MAINTENANCE OF TEMPERATURE, ADEQUACY OFFLOWS AND CAPACITIES, ELIMINATION OF NOISE AND VIBRATION, AND SHALL BE LEFT IN PROPEROPERATING CONDITION.24. TEST & BALANCING:a. THE NEWLY INSTALLED HEATING AND VENTILATING SYSTEM SHALL BE BALANCED BY ANINDEPENDENT CERTIFIED TEST AND BALANCE COMPANY.b. 5 COPIES OF THEIR BALANCE REPORTS SHALL BE SUBMITTED TO THE ENGINEER FORREVIEW AND APPROVAL. ELECTRONIC DISTRIBUTION PREFERRED.c. ALL REQUIRED RE-SHEEVING AND ADJUSTING OF EQUIPMENT SHALL BE MADE BY THETEST & BALANCE CONTRACTOR.d. ALL FINAL MEASURED CAPACITIES SHALL BE WITHIN 10% OF THOSE INDICATED ON THEPLANS.25. FINAL LOCATION OF GRILLES, REGISTERS & DIFFUSERS SHALL BE PER THE ARCHITECTURALPLANS, ELEVATIONS OR AS PER FIELD REQUIREMENTS (UPON ACCEPTANCE BY ARCHITECT).26. THE GENERAL CONTRACTOR SHALL FURNISH & INSTALL ALL OF THE REQUIRED ACCESS PANELSIN THE DRYWALL CEILINGS TO GAIN SERVICE ACCESS TO THE EQUIPMENT. EQUIPMENT WITHMANUFACTURER MANDATED SERVICE REQUIREMENTS INSTALLED WITHIN CRAWLSPACES MUSTBE A MAXIMUM OF 20 FEET FROM AN ACCESS PANEL.27. ALL EQUIPMENT SHALL BE INSTALLED ACCORDING TO THE MANUFACTURER'S INSTALLATION,OPERATION & MAINTENANCE MANUAL'S RECOMMENDATIONS ESPECIALLY FOR SERVICECLEARANCES.28. FILTERS:a. SHALL BE UL RATED AND APPROVED.b. PRESSURE DROPS SHALL NOT EXCEED .10" STATIC PRESSURE.29. ELECTRICAL CONNECTIONS:a. UNLESS OTHERWISE INDICATED ALL MAGNETIC MOTOR STARTERS, THERMALOVERLOADS, LOW VOLTAGE THERMOSTATS, CONTROL RELAYS, CONTROLTRANSFORMERS AND SOLENOID VALVES SHALL BY FURNISHED BY THE MECHANICALCONTRACTOR.b. UNLESS OTHERWISE SPECIFIED, ALL MOTORIZED DAMPERS SHALL BE LOW VOLTAGE.ALL WIRING AND POWER CONNECTIONS SHALL BE PROVIDED BY THE MECHANICALCONTRACTOR.c. PROVIDE MOTORS AND EQUIPMENT FOR ONLY THOSE CURRENT CHARACTERISTICSINDICATED ON THE DRAWINGS.d. IT IS THE INTENT OF THIS DIVISION TO REQUIRE A COMPLETE SYSTEM PER THECONTRACT DOCUMENTS.e. COORDINATE ALL EQUIPMENT REQUIRING ELECTRICAL POWER, REGARDLESS OFVOLTAGE, WITH OTHER TRADES, SO THAT ALL SYSTEMS ARE COMPLETE ANDOPERATIONAL.f. ALL THREE PHASE MOTORS SHALL BE PROVIDED WITH PHASE LOSS PROTECTION.g. ALL SINGLE AND THREE PHASE MOTORS, STARTERS AND DISCONNECTS PROVIDED BYMECHANICAL CONTRACTOR AND WIRED BY THE ELECTRICAL CONTRACTOR.30. TEMPORARY HEATING DURING CONSTRUCTION:a. MECHANICAL EQUIPMENT SHALL NOT BE UTILIZED FOR TEMPORARY HEATING.b. GAS FIRED TEMPORARY HEAT SHALL BE PROVIDED BY THE GENERAL CONTRACTOR.SEQUENCE OF OPERATION:ALL SEQUENCES DESCRIBE BELOW SHALL BE CONTROLLED VIA EAGLE COUNTY'S TRANE TRACERCONTROL SYSTEM. THE MECHANICAL CONTRACTOR SHALL COORDINATE WITH CONTROLSCONTRACTOR PRIOR TO INSTALLATION.UH-(E):ALL EXISTING UNIT HEATER CONTROLS TO REMAIN.VAV 1-1:THE EXISTING FAN POWERED VAV BOX, VAV 1-1, SHALL BE CONTROLLED VIA EAGLE COUNTY'STRANE TRACER CONTROL SYSTEM AND THE ASSOCIATED RELOCATED TEMPERATURE SENSOR.UPON A CALL FOR HEATING, THE FAN POWERED VAV BOX AND ASSOCIATED HEATING COIL SHALLENGAGE AND MAINTAIN A 70°F (ADJ.) SPACE TEMPERATURE MEASURED VIA REMOTE TEMPERATURESENSOR.UPON A CALL FOR COOLING, THE FAN POWERED VAV BOX SHALL ENGAGE AND MAINTAIN A 75°F(ADJ.) SPACE TEMPERATURE MEASURED VIA REMOTE TEMPERATURE SENSOR.WHEN THERE IS NO CALL FOR HEATING OR COOLING, DURING OCCUPIED TIMES, THE FAN SHALL RUNIN FAN-ONLY MODE TO PROVIDE CODE REQUIRED VENTILATION.VAV 1-2:THE PINCH DOWN VAV BOX, VAV 1-2, SHALL BE CONTROLLED VIA EAGLE COUNTY'S TRANE TRACERCONTROL SYSTEM AND THE ASSOCIATED TEMPERATURE SENSOR.UPON A CALL FOR HEATING, THE PINCH DOWN VAV BOX AND ASSOCIATED HEATING COIL SHALLENGAGE AND MAINTAIN A 70°F (ADJ.) SPACE TEMPERATURE MEASURED VIA REMOTE TEMPERATURESENSOR.UPON A CALL FOR COOLING, THE PINCH DOWN VAV BOX SHALL OPEN FULLY AND MAINTAIN A 75°F(ADJ.) SPACE TEMPERATURE MEASURED VIA REMOTE TEMPERATURE SENSOR.WHEN THERE IS NO CALL FOR HEATING OR COOLING, DURING OCCUPIED TIMES, THE BOX SHALLOPEN PARTIALLY TO PROVIDE CODE REQUIRED VENTILATION.VAV-(E):CONTROLS FOR ALL EXISTING VAV BOXES TAGGED VAV-(E) TO REMAIN.ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMITDocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 R=WWR=WWRADIUS ELBOW DETAILNO SCALEINSULATED RIGID DUCTAIR FLOWCLAMPMANUAL DAMPER,HANDLE, & LOCK NUTWORM DRIVE S.S.Ø TWIST-IN FITTING W/INSULATED RIGID DUCTAIR FLOWCLAMPMANUAL DAMPER,HANDLE, & LOCK NUTWORM DRIVE S.S.Ø TWIST-IN FITTING W/1/4 OF "W" ORAIR FLOWRETURN/EXHAUST45°6" MINIMUM.SUPPLYAIR FLOWWSEAL AIRTIGHTAROUND ENTIRETAKE-OFF.1/4 OF "W" ORAIR FLOWRETURN/EXHAUST45°6" MINIMUM.SUPPLYAIR FLOWWSEAL AIRTIGHTAROUND ENTIRETAKE-OFF.ROUND DUCT TAKE-OFF DETAILNO SCALE45° DUCT TAKE-OFF DETAILNO SCALETYPICAL DIFFUSER CONNECTION DIAGRAMNO SCALENOTE: DIFFUSERS INSTALLED IN DRY WALL HARD LID CEILINGS REQUIRE ARIGID CONNECTION AND ROTO-TWIST REMOTE DAMPER CONTROLLER.SQUARE TO ROUND ADAPTERAS REQUIREDSHEET METAL SHIELDSHEET METAL STRAPS.S. WORM DRIVE CLAMPSPIN-IN FITTING WITH S.B.D.EXTERIOR DUCT INSULATIONINSULATED ACOUSTICALFLEX DUCT(5 FEET MAXIMUM)LAY-IN CEILINGCEILING DIFFUSER WITH FRAME TYPE 3ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMIT DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 GENERAL NOTES:1. ALL MECHANICAL SYSTEMS ON THIS LEVEL ARE EXISTING TO REMAIN.(E)23x23-SA-UP (25x25)(E)24x24-RA-UP (26x26)AHU(E)(E)24x24 - OALOUVER(E)12"Ø - OA(E)19x19 - SA(E)26x26 - RA(E)12x12 - OAL(E)UH(E)ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMIT NORTHBASEMENT HVAC PLANSCALE: 1/4" = 1'0"DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 VAV1-1(E)16x10-SA-UP (18x12)(E)23x23-SA-DN (25x25)(E) - SA(E)18x10-RA-UP (20x12)(E)24x24-RA-DN (26x26)UH(E)UH(E)(E) - RA(E)SA24x24(E) - SA(E)100-SA24x24(D)SA24x24(E)300-RA18x18(E)75-SA24x24(E)300-SA12x12(D)RA24x24VAV(E)(E) - SA(E) - SA(D)SA24x24(E) - SA(E) - SA(E) - SA(E) - SA(E) - RA(E) - SAUH(E)(E) - SA(E) - TAGENERAL NOTES:1. ALL DUCTWORK DIMENSIONS ARE SHOWN INSIDE TO INSIDE.2. ALL NEW INTERIOR SUPPLY AND RETURN DUCTWORK SHALL INCLUDE 1"LINER UNLESS OTHERWISE NOTED. ALL OUTSIDE AIR INTAKE AND ROUNDDUCTWORK SHALL BE WRAPPED WITH 1.5" THICK INSULATION UNLESSOTHERWISE NOTED.3. ALL FINAL DUCTWORK CONNECTIONS TO SUPPLY GRILLES (OR PLENUMS)SHALL BE COMPLETED WITH ACOUSTICAL FLEXIBLE DUCT UNLESSOTHERWISE NOTED AND A MAXIMUM LENGTH OF FIVE FEET.4. ALL ROUND DUCT CONNECTIONS TO ROUND DUCTWORK SHALL BECONICAL TEES.5. ALL SQUARE 90 DEGREE ELBOWS SHALL HAVE TURNING VANES.6. ALL NEW DUCTWORK SHALL BE RUN TIGHT TO UNDERSIDE OFSTRUCTURE WHERE IT EXISTS UNLESS OTHERWISE NOTED.7. ALL NEW SUPPLY GRILLES SHALL INCLUDE A BALANCING DAMPER(S),EVEN IF NOT SPECIFICALLY SHOWN, UNLESS OTHERWISE NOTED. IF THEDAMPER IS LOCATED IN AN INACCESSIBLE LOCATION, CABLE-STYLEDAMPERS (ROTOTWIST OR EQUIVALENT) SHALL BE INSTALLED ANDSHALL BE ADJUSTABLE FROM THE GRILLE FACE.8. COORDINATE ALL ACCESS PANEL LOCATIONS WITH THE ARCHITECT.SHEET DETAIL NOTES:EXISTING UNIT HEATER TO BE RELOCATED. COORDINATE EXACTLOCATION WITH ARCHITECT.EXISTING DUCT TO BE RECONNECTED.EXISTING VAV 1-1 TEMPERATURE SENSOR TO BE RELOCATED ASSHOWN. COORDINATE EXACT EXISTING LOCATION IN FIELD.EXISTING UNIT HEATER TO REMAIN.CONTRACTOR TO VERIFY EXISTING DUCT SIZE ADEQUATE TO ACHIEVECFM'S SHOWN. DUCT TO BE MINIMUM 10"Ø OR EQUIVALENT. IF DUCTIS DOES NOT MEET MINIMUM REQUIREMENT, CONTACT ENGINEER.CONTRACTOR TO VERIFY EXISTING DUCT SIZE ADEQUATE TO ACHIEVECFM'S SHOWN. DUCT TO BE MINIMUM 12"Ø OR EQUIVALENT. IF DUCTIS DOES NOT MEET MINIMUM REQUIREMENT, CONTACT ENGINEER.121EXISTING MECHANICAL SYSTEMIN THIS AREA TO REMAIN.345465(E) - RA5536(E) - SA56(E) - RA65ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMIT NORTH1st FLOOR HVAC DEMO PLANSCALE: 1/4" = 1'0"DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 VAV1-2B130-SA24x24C260-RA24x1210"Ø-RA(13"Ø)8"Ø-SA(11"Ø)VAV1-1(E)16x10-SA-UP (18x12)(E)23x23-SA-DN (25x25)(E) - SA(E)18x10-RA-UP (20x12)(E)24x24-RA-DN (26x26)UH(E)(E) - RA(E) - SA(E)100-SA24x24(E)300-RA18x18(E)75-SA24x24(E)300-SA12x12VAV(E)(E) - SA(E) - SA(E) - SA(E) - SAUH(E)(E) - SAUH(E)GENERAL NOTES:1. ALL DUCTWORK DIMENSIONS ARE SHOWN INSIDE TO INSIDE.2. ALL NEW INTERIOR SUPPLY AND RETURN DUCTWORK SHALL INCLUDE 1"LINER UNLESS OTHERWISE NOTED. ALL OUTSIDE AIR INTAKE AND ROUNDDUCTWORK SHALL BE WRAPPED WITH 1.5" THICK INSULATION UNLESSOTHERWISE NOTED.3. ALL FINAL DUCTWORK CONNECTIONS TO SUPPLY GRILLES (OR PLENUMS)SHALL BE COMPLETED WITH ACOUSTICAL FLEXIBLE DUCT UNLESSOTHERWISE NOTED AND A MAXIMUM LENGTH OF FIVE FEET.4. ALL ROUND DUCT CONNECTIONS TO ROUND DUCTWORK SHALL BECONICAL TEES.5. ALL SQUARE 90 DEGREE ELBOWS SHALL HAVE TURNING VANES.6. ALL NEW DUCTWORK SHALL BE RUN TIGHT TO UNDERSIDE OFSTRUCTURE WHERE IT EXISTS UNLESS OTHERWISE NOTED.7. ALL NEW SUPPLY GRILLES SHALL INCLUDE A BALANCING DAMPER(S),EVEN IF NOT SPECIFICALLY SHOWN, UNLESS OTHERWISE NOTED. IF THEDAMPER IS LOCATED IN AN INACCESSIBLE LOCATION, CABLE-STYLEDAMPERS (ROTOTWIST OR EQUIVALENT) SHALL BE INSTALLED ANDSHALL BE ADJUSTABLE FROM THE GRILLE FACE.8. COORDINATE ALL ACCESS PANEL LOCATIONS WITH THE ARCHITECT.SHEET DETAIL NOTES:EXISTING UNIT HEATER TO BE RELOCATED. COORDINATE EXACTLOCATION WITH ARCHITECT.EXISTING DUCT TO BE RECONNECTED.EXISTING VAV 1-1 TEMPERATURE SENSOR TO BE RELOCATED ASSHOWN. COORDINATE EXACT EXISTING LOCATION IN FIELD.EXISTING UNIT HEATER TO REMAIN.CONTRACTOR TO VERIFY EXISTING DUCT SIZE ADEQUATE TO ACHIEVECFM'S SHOWN. DUCT TO BE MINIMUM 10"Ø OR EQUIVALENT. IF DUCTIS DOES NOT MEET MINIMUM REQUIREMENT, CONTACT ENGINEER.CONTRACTOR TO VERIFY EXISTING DUCT SIZE ADEQUATE TO ACHIEVECFM'S SHOWN. DUCT TO BE MINIMUM 12"Ø OR EQUIVALENT. IF DUCTIS DOES NOT MEET MINIMUM REQUIREMENT, CONTACT ENGINEER.121A75-SA12x62S6"Ø - SA(9"Ø)8"Ø-SA(11"Ø)SEXISTING MECHANICAL SYSTEMIN THIS AREA TO REMAIN.3454B130-SA24x248"Ø-SA(11"Ø)10"Ø-SA(13"Ø)65(E) - RA5536(E) - SA56(E) - RA65ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMIT NORTH1st FLOOR HVAC PLANSCALE: 1/4" = 1'0"DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 VAV(E)VAV(E)VAV(E)EF(E)C285-RA24x12C155-RA24x12SHEET DETAIL NOTES:NEW RETURN GRILLE WITH SOUND BOOT TO ACCOMMODATE NEWWALL LOCATIONS.1EXISTING MECHANICAL SYSTEMON THIS LEVEL TO REMAIN. ADDNEW RETURN GRILLES AS NOTED.11GENERAL NOTES:1. ALL MECHANICAL SYSTEMS ON THIS LEVEL ARE EXISTING TO REMAIN.ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMIT NORTH2nd FLOOR HVAC PLANSCALE: 1/4" = 1'0"DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 GENERAL NOTES:1. ALL MECHANICAL SYSTEMS AND ASSOCIATED PIPING ON THIS LEVEL AREEXISTING TO REMAIN.AHU(E)(E)HWS(E)HWR(E)CWS(E)CWR(E)CWS(E)CWR(E)HWS(E)HWR(E) 1"HWR UP(E) 1"HWS UPUH(E)ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMIT NORTHBASEMENT MECHANICAL PIPING PLANSCALE: 1/4" = 1'0"DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 VAV(E)VAV(E)UH(E)UH(E)(E) 1"HWR DN(E) 1"HWS DN(E) HWS(E) HWR(E) HWS (E) HWR(E) HWS(E) HWRVAV1-31"12"12"34"34"UH(E)SHEET DETAIL NOTES:EXISTING UNIT HEATER TO BE RELOCATED. COORDINATE EXACTLOCATION WITH ARCHITECT. EXTEND PIPING AS REQUIRED.1134"GENERAL NOTES:1. OFFSET PIPING AS REQUIRED TO AVOID ALL DUCTWORK, LIGHTS, ANDSTRUCTURE. COORDINATE ALL STRUCTURAL PENETRATIONS WITH THESTRUCTURAL ENGINEER.2. ALL PIPING PASSING THROUGH FIRE-RATED ASSEMBLIES SHALL INCLUDEA FIRE-RATED PIPE SEALANT RATED TO MATCH THAT OF THE ASSEMBLY.3. ALL PIPING SIZED FOR TYPE L COPPER. CONTACT ENGINEER FOR ANYCHANGE TO PEX FOR NECESSARY PIPE SIZING AND/OR PUMP CHANGES.4. INSULATE ALL PIPE LEADERS PASSING THROUGH ADJACENT ZONES.EXISTING MECHANICAL SYSTEMIN THIS AREA TO REMAIN.ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMIT NORTH1st FLOOR MECHANICAL PIPING PLANSCALE: 1/4" = 1'0"DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 VAV(E)VAV(E)(E) HWS(E) HWRVAV(E)(E) HWS(E) HWREXISTING MECHANICAL SYSTEMON THIS LEVEL TO REMAIN.GENERAL NOTES:1. ALL MECHANICAL SYSTEMS AND ASSOCIATED PIPING ON THIS LEVEL AREEXISTING TO REMAIN.ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMIT NORTH2nd FLOOR MECHANICAL PIPING PLANSCALE: 1/4" = 1'0"DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 H/PHEAT/PHOTOELECTRIC SMOKE DETECTORELECTRICAL LEGEND(NOT ALL SYMBOLS REQUIRED FOR THIS PROJECT)RECESSED OR SURFACE DOWNLIGHTWALL MOUNTED LIGHT FIXTURERECESSED FLUOR. LIGHT FIXTURESURFACE FLUOR. LIGHT FIXTUREAaAaFIXTURE DESIGNATIONS: UPPER CASE - FIXTURE TYPE LOWER CASE - SWITCH DESIGNATIONSHADING ON FIXTURE INDICATES EMERG. BATTERY BACKUPFLUORESCENT STRIP FIXTURETRACK LIGHT AS NOTED OR SCHEDULEDWALL WASHERPOLE-MOUNTED FIXTUREPOST (BOLLARD) FIXTURECEILING OR WALL MOUNTED EXIT LIGHTEMERGENCY BATTERY LIGHTSDUPLEX RECEPTACLE @ 18" UNLESS NOTEDDOUBLE DUPLEX RECEPTACLE @ 18" UNLESS NOTEDSPECIAL OUTLET AS NOTEDFLUSH FLOOR DUPLEX RECEPTACLEDUPLEX RECEPTACLE HALF-SWITCHED @ 18" UNLESS NOTEDTELE-POWER POLEJUNCTION BOX IN FLOOR, CEILING OR IN WALLMULTI-OUTLET PLUG STRIPJJJCOMPUTER/TELEPHONE OUTLET IN FLOOR OR WALLCONDUIT RUN CONCEALED IN WALL OR ABOVE CEILINGTELEPHONE BACKBOARDCIRCUIT HOMERUNCONDUIT RUN BELOW FLOOR OR GRADECONDUIT STUB-UP - CAP & MARKLIGHT SWITCH AT 46" UNLESS NOTEDSUBSCRIPTS:2 = 2-POLE SWITCH3 = 3-WAY SWITCH4 = 4-WAY SWITCHK = KEY-OPERATED SWITCHTO = THERMAL OVERLOAD SWITCHP = SWITCH WITH PILOT LIGHTDIMMER SWITCH W/ WATTAGEMAGNETIC MOTOR STARTERDISCONNECT SWITCHPANELBOARD OR LOAD CENTER, FLUSH OR SURFACE MOUNTEDSWITCHBOARD, MOTOR CONTROL CENTER OR DISTRIBUTION BOARDTRANSFORMERGROUNDPUSHBUTTON CONTROL STATIONPHOTOELECTRIC CELLTIME SWITCHTHERMOSTAT AT 60" UNLESS NOTEDDIVISION 15 EQUIPMENTCIRCUIT BREAKERMOTOR OUTLETAUTOMATIC TRANSFER SWITCHFOOD SERVICE EQUIPMENTDTPCTSTMATSABBREVIATIONS- ABOVE COUNTERACAFF- ABOVE FINISHED FLOOR- ABOVE FINISHED GRADEAFG- ALUMINUMAL- EMERGENCYEM- GROUNDGND- GROUND FAULT INTERRUPTERGFINIC- NOT IN CONTRACTNL- NIGHT LIGHTNTS- NOT TO SCALEUG- UNDERGROUNDWP - WEATHER PROOFXFMR- TRANSFORMER+18"- MOUNTING HEIGHT TO CENTERLINE OF DEVICE AFF OR AFGFIRE ALARM SYSTEMFIRE ALARM CONTROL PANELANNFIRE ALARM ANNUNCIATOR PANELFIRE ALARM PULL STATIONALARM HORN OR SPEAKERCOMBINATION HORN/STROBE OR SPEAKER/STROBETHERMAL HEAT DETECTORHSMOKE/IONIZATION DETECTORIPHOTOELECTRIC SMOKE DETECTORPDUCT DETECTORSRSPRINKLER SYSTEM FLOW SWITCHSPRINKLER SYSTEM TAMPER SWITCHSTROBESMOKE/FIRE DAMPER CONNECTIONREMOTE INDICATOR LIGHTFDCOMMUNICATION SYSTEMSPEAKER IN CEILING OR WALLVOLUME CONTROL AT 60" UNLESS NOTEDMICROPHONE OUTLET IN FLOOR BOX OR WALLMMCALL-IN SWITCHCPROGRAM BELLINTERCOMCLOCKVISSBAAMPLIFIERTELEVISION OUTLETCONTACT DOOR SWITCH IN JAMB OR HINGESECURITY SYSTEMDCINTRUSION MOTION DETECTOR AS SPECIFIED, CORRIDOR/ROOMPC OR RKEY-OPERATED ACCESS SWITCHKSURVEILLANCE CAMERADISTRIBUTION EQUIPMENT SYMBOLSDISCONNECT SWITCHFUSESCIRCUIT BREAKERCURRENT TRANSFORMERTRANSFORMERMETERMCU- COPPERSTEP LIGHTFACPM = MOTION-OPERATED SWITCHPOP-UP RECEPTACLE- ELECTRICAL CONTRACTOREC- AUTHORITY HAVING JURISDICTIONAHJ- MECHANICAL CONTRACTORMC- PLUMBING CONTRACTORPCUTP- UNSHIELDED TWISTED PAIR- GENERAL CONTRACTORGC- REFERENCEREF1. WALL ASSEMBLY - THE 1, 2, 3 OR 4 HR FIRE-RATED GYPSUM WALLBOARD/STUD WALL ASSEMBLYSHALL BE CONSTRUCTED OF THE MATERIALS AND IN THE MANNER DESCRIBED IN THE INDIVIDUALU300 OR U400 SERIES WALL OR PARTITION DESIGNS IN THE UL FIRE RESISTANCE DIRECTORY ANDSHALL INCLUDE THE FOLLOWING CONSTRUCTION FEATURES: A. STUDS - WALL FRAMING MAY CONSIST OF EITHER WOOD STUDS (MAX 2 HR FIRE RATEDASSEMBLIES) OR STEEL CHANNEL STUDS. WOOD STUDS TO CONSIST OF NOM 2 BY 4 IN.(51 BY 102 MM) LUMBER SPACED 16 IN. (406 MM) OC WITH NOM 2 BY 4 IN. (51 BY 102 MM) LUMBER ENDPLATES AND CROSS BRACES. STEEL STUDS TO BE MIN 3-5/8 IN. (92 MM) WIDE BY 1-3/8 IN.(35 MM) DEEP CHANNELS SPACED MAX 24 IN. (610 MM) OC. B. GYPSUM BOARD* - NOM 1/2 OR 5/8 IN. (13 OR 16 MM) THICK, 4 FT. (122 CM) WIDE WITH SQUAREOR TAPERED EDGES. THE GYPSUM WALLBOARD TYPE, THICKNESS, NUMBER OF LAYERS, FASTENERTYPE AND SHEET ORIENTATION SHALL BE AS SPECIFIED IN THE INDIVIDUAL U300 OR U400 SERIESDESIGN IN THE UL FIRE RESISTANCE DIRECTORY. MAX DIAM OF OPENING IS 26 IN. (660 MM).2. THROUGH PENETRANT - ONE CONDUIT INSTALLED EITHER CONCENTRICALLY ORECCENTRICALLY WITHIN THE FIRESTOP SYSTEM. THE ANNULAR SPACE BETWEEN PIPE, CONDUIT ORTUBING AND PERIPHERY OF OPENING SHALL BE MIN OF 0 IN. (0 MM) (POINT CONTACT) TO MAX 2 IN.(51 MM). PIPE, CONDUIT OR TUBING TO BE RIGIDLY SUPPORTED ON BOTH SIDES OF WALL ASSEMBLY.THE FOLLOWING TYPES AND SIZES OF METALLIC PIPES, CONDUITS OR TUBING MAY BE USED: A. CONDUIT - NOM 6 IN. (152 MM) DIAM (OR SMALLER) STEEL CONDUIT OR NOM 4 IN. (102 MM) DIAM(OR SMALLER) STEEL ELECTRICAL METALLIC TUBING3. FILL,VOID OR CAVITY MATERIAL* - CAULK OR SEALANT - MIN 5/8. 1-1/4, 1-7/8 AND 2-1/2 IN.(16, 32, 48 AND 64 MM) THICKNESS OF CAULK FOR 1, 2, 3 AND 4 HR RATED ASSEMBLIES,RESPECTIVELY, APPLIED WITHIN ANNULUS, FLUSH WITH BOTH SURFACES OF WALL. MIN 1/4 IN. (6 MM)DIAM BEAD OF CAULK APPLIED TO GYPSUM BOARD/PENETRANT INTERFACE AT POINT CONTACTLOCATION ON BOTH SIDES OF WALL.THE HOURLY F RATING OF THE FIRESTOP SYSTEM IS DEPENDENT UPON THE HOURLY FIRE RATINGOF THE WALL ASSEMBLY IN WHICH IT IS INSTALLED, AS SHOWN IN THE FOLLOWING TABLE.THE HOURLY T RATING OF THE FIRESTOP SYSTEM IS DEPENDENT UPON THE TYPE OR SIZE OF THEPIPE OR CONDUIT AND THE HOURLY FIRE RATING OF THE WALL ASSEMBLY IN WHICH IT IS INSTALLED,AS TABULATED TO THE LEFT.3M COMPANY - CP 25WB+ CAULK OR FB-3000 WT SEALANT,*BEARING THE UL CLASSIFICATION MARKINGPENETRATION THROUGH A FIRE-RATED WALLDTJTV18" (1'-6")46" (3'-10")48" (4'-0")80" (6'-8")TYPICAL DEVICEMOUNTING HEIGHTSMAIN CIRCUIT BREAKER &BRANCH CIRCUIT BREAKERSMAXIMUM MOUNTING HEIGHTIS 79", MINIMUM IS 18".CABLE TV ONE LINE DIAGRAM+80"AFFP+80"AFF#6 CU GUNO- UNLESS NOTED OTHERWISE2"C PVC WITH PULLWIREBURIED 20" BELOW GRADECATVPEDESTALCOAX RECEPTACLEIN SINGLE GANG BOX@ 18" A.F.F. UNOQUANTITIES PER FLOOR PLANSSTRUCTURED CABLEDISTRIBUTION PANEL#6 CU GMETALLIC COLDWATER PIPEROUTE WIRE AT CEILING PARALLEL ORPERPENDICULAR TO STRUCTURE.SECURE TO STRUCTUREAT 4' INTERVALS OR LESS.STUB UP TO ABOVEACCESSIBLE CEILNGSTRUCTURED CABLEDISTRIBUTION PANEL(2 #CAT 6) 3/4"CPLENUM RATED WIREWHEN REQUIRED(2) RJ-45 IN SINGLEGANG BOX AT 18"AFF UNOCOLD WATER PIPENO SCALENOTES:1.HEIGHTS SHOWN ARE TYPICAL TO CENTERLINE OF BOXUNLESS NOTED OTHERWISE.2. DEVICES ABOVE DOORS SHALL BE CENTERED BETWEEN TOP OF DOOR TRIM AND CEILING LINE.3.MOUNTING HEIGHTS SHOWN ON ARCHITECTURAL ELEVATIONSAND NOTED ON ELECTRICAL FLOOR PLANS SHALL GOVERNOVER THOSE SHOWN ABOVE.4. FOR CEILING HEIGHTS HIGHER THAN 7'-2", INSTALL FIRE ALARMNOTIFICATION AUDIO AND VISUAL APPLIANCES AT 80" AFF OTHERWISE INSTALL AT 6" BELOW CEILING.5.MOUNTING HEIGHTS PER IBC 2009 AND ADA CODESMAIN TELE/DATA ROOM(PULLWIRE) 4"CNO SCALENO SCALENO SCALEFINISHED FLOORTYPICAL 8'-0" CEILINGequipment, etc. furnish by mechanical - refer to both electrical andelectrical apparatus as shown on single line diagram and drawings.and mechanical drawing for scope and work and additional information.Complete connection of HVAC/Plumbing motor(s), water heater(s),Fire alarm system will be by electrical contractor.Complete provision, installation and connection of lighting fixtures,exit signs and lamps as specified and as shown on drawings.Complete branch circuit wiring required for the connection ofemergency lighting and exit signs to existing emergency standComplete feeder(s) installation as required for new and/ordevices, new control devices, etc. for a complete lighting andincluding new panelboards, new conduits, new wires, new wiringComplete wiring system for new lighting and power as shown,contract. Electrical work shall include, but not limited to, these major items: as indicated on drawing and as specified, as necessary to complete theSCOPE: Furnish all materials and labor required to execute this workProvide grounding and bonding Facilities.Complete all electrical demolition as required.A.ELECTRICAL SPECIFICATIONS1.by power system.and power system.C.B.A.Contractor shall submit shop drawings for engineer review and approval.MC cable permitted per local codes. Run hard pipe from panel to localShop drawing submittal shall include:CONDUIT AND WIRE:B.5.A.B.and contractor shall have written approvals from building owner priorCore drilling and patching of existing building structure required for electrical work. Core drilling shall follow Building Standard proceduresPERMITS AND FEES: Obtain and pay for all necessary permits, Inspections,examinations and fees or charges necessary for execution andSHOP DRAWINGS AND SUBMITTAL:to start of any work.Test of entire system and work.REGULATIONS AND CODES:completion of electrical work.4.3.A.2.THE NEW FIRE LIFE SAFETY EQUIPMENT REQUIRED FOR THIS CONTRACT SHALL BE BY THE SAME MANUFACTURER. ALL FIRE LIFE SAFETY SYSTEM COMPONENT, EQUIPMENT, DEVICES, ETC. LESS WIRING PROVIDED IN THIS CONTRACT SHALL BE COMPATIBLE FOR SAID ALARM EQUIPMENT USED AT THE SITE, AND BE BOTH CFM AND U.L. LISTED FOR SAME.CONTRACTOR SHALL SUBMIT UNIT PRICES ON F.A. EQUIPMENT AND DEVICES PRIOR TO BID, CONTRACTOR SHALL VERIFY NEW FIRE LIFE SAFETY INSTALLATION AND INCLUDE ALL LABOR AND MATERIAL REQUIREDFOR A COMPLETE AND OPERABLE LIFE SAFETY AND SMOKE CONTROL SUPPLY & INSTALL NEW EQUIPMENT AND MODIFICATIONS TO EXISTING FIRE ALARM PROVIDE ALL COSTS FOR LABOR, DESIGN, ENGINEERING,SYSTEM TO PROVIDE A COMPLETE FIRE ALARM SYSTEM TO MEET LOCAL CODES. ALL NEW FIRE ALARM EQUIPMENT, DEVICES, WIRING, ETC. REQUIRED AND WHICH ARE INSTALLED FOR THE FACILITY SHALL MEETLATEST EDITION OF THE NFPA FIRE LIFE SAFETY CODES AND SHALL MEET ALL CITY AND STATE FIRE MARSHALL REQUIREMENTS.THE FIRE ALARM SYSTEM SCOPE OF WORK SHALL INCLUDE, BUT NOT NECESSARILY BE LIMITED TO THE FOLLOWING:CALCULATIONS, SHOP DRAWING, ETC. INCLUDING SUBMISSION OF FINAL FIRE ALARM LIFE SAFETY DRAWING TO THE AUTHORITY HAVINGJURISDICTION FOR REVIEW AND APPROVAL.PROVIDE ALL COSTS FOR LABOR, MATERIAL, INSTALLATION,CONNECTION AND EXECUTION OF FIRE LIFE SAFETY ALARM EQUIPMENT, DEVICES, CONDUIT/WIRING SYSTEM, ETC. AS REQUIRED DUE TO THE CONSTRUCTION OF THIS FACILITY.IN THEIR BID.SYSTEM(S).3.2.B.A.1.ALARM DEVICE LOCATIONS & QUANTITIES PRIOR TO FINAL ROUGHIN.WITH THE AUTHORITY HAVING JURISDICTION TO DETERMINE FINAL FIRE AND ARE DIAGRAMMATIC ONLY. THE CONTRACTOR SHALL WALK THROUGHDRAWINGS HAVE BEEN DEVELOPED FOR BIDDING AND PRICING PURPOSES4.WHEN PERMITTED BY THE AUTHORITY HAVING JURISDICTION, COORDINATE WITHPAINTER TO FINISH THE CEILING MOUNTED SMOKE DETECTORS TO MATCHRESPECTIVE CEILINGS. REFER TO MANUFACTURER'S INSTRUCTIONSREGARDING ADDITIONAL FINISHES TO THE SPECIFIC PRODUCT.5.14. All cabling shall be bundled and properly secured and terminated. warranty period shall begin at the point of system acceptance or beneficial system during this warranty period at no additional cost to the owner. The free of defects of workmanship or products and will inspect and repair the from the date of project completion. The contractor warrants the system to be15. The warranty set forth for this system shall consist of a full three (3) years use, whichever comes later.Coordinate numbering scheme with owner.enclosed within cable trays, raceways or conduit, as specified.engineer. Cabling shall be in the wall, above the ceiling or where exposed,13. No exposed wiring will be accepted unless approved in writing by theCare must be taken to ensure cables are not kinked, bent beyond limit,including NEC, EIA/TIA 568,569 and 606, and federal, state and local codes. familiar and install in accordance with all applicable codes and standards,12. All cable hangers shall be no more than 48" apart. Contractor shall be Cables are to be kept a minimum of 6" from power lines, electric motors, 11. Cable bends shall be no less than eight times the cable diameter or 1.00". termination. No more than .5 inches of exposed untwisted pairs shall be the extent in which each twisted pair is unraveled at the point of its physical 10. All connections of twisted wiring shall be made in such a way as to minimize length of the run. Splices and bridge taps with cabling are strictly prohibited. Cabling shall be free from tension at both ends, as well as through out the 9. All wiring shall be protected from moving mechanical or physical contacts. cable runs exceeding 90 meters and provide solution to meet the 90 meter 8. Route cables so as not to exceed 90 meters in length. Bidder will identify any the case of "hard" drywall ceilings, adequate support shall be accomplishedindependent hangers. Cable "draped" across ceiling tiles is unacceptable. In 7. All cable above the ceiling must be tied and properly supported with 6. Provide plenum rated cable when required by article NEC 300-22.overloaded, over-cinched, crushed, improperly untwisted, etc.fluorescent fixtures or heat generating devices.present at these locations.termination. No more thantermination. No more thaWiring is to be run in cable tray and conduit where specified. requirement.where reasonably possible.patch panel location, and each wall/floor faceplate that has wiring installed. 5. All cables shall be labeled with self-laminating labels at each cable end, at eachjacks, match faceplates to power, color coded for voice and data, match to modular RJ-45, 8 pin, 8 conductor, Hubbell, Leviton, or lucent or equivalent 3. The terminations at the station locations must be Category 6, T568B (AT&T) 2. Data cable shall be colored blue. Voice cable shall be colored white.manufacturers include: Berk-Tek, Belden, Lucent or equivalent. 500 Mhz or better category 6, 4 pair UTP as applicable. Acceptable 1. The cabling for voice and data must be continuous, home run, non-spliced,4. Wall mounted patch panels will be provided by EC.cable. Outlets will be securely held in place.B. Cat 6 Wiring Requirementsgq6.A. General RequirementsqC. Fire Life Safety Scope of Workyp& General ConditionsPROVIDE PLENUM RATED CABLE WHEN REQUIRED BY ARTICLE NEC 300-22.6.decora style, 15 amp will be acceptable for Residences. Convenience receptacles will be 20 amp, commercial gradeLight switches will be 20 amp, commercial grade, decora style.B.ELECTRICAL DEVICES:A.Finish per owner or architect.Provide decora style, finish per owner or architect.Dimming switches will be a minimum of 600w or as noted.C.7.Support all electrical equipment independent of accessible ceilingsas required by NEC.SUPPORT:A.All mounting heights will conform to ADA guidelines. Typical receptacleD.heights will be +18"AFF and switch heights will be +46"AFF unless noted otherwise.8.At fire rated wall space electrical boxes at opposite sides of the wallno less than 24" horizontal distance.ELECTRICAL BOXES:A.When phone, TV & power receptacles are shown on plan next to each other. Locate respective receptacles next to each other on site with no moreB.than 1" seperating cover plates.Provide GFI type receptacles at kitchens, bathrooms, garages,exterior etc. as required by code.E.ACCEPTABLE FIRE ALARM SYSTEM MANUFACTURERS ARE SIMPLEX, NOTIFIER,SILENT KNIGHT & FIRELITE. FIRE ALARM SYSTEMS MUST HAVE PARTS AND SERVICEAVAILABLE WITHIN 24 HOURS.7.8.junction box, and run MC cable from junction box to device.CONDUCTOR SIZES AND TYPES: For sizes #1/0 AWG and larger, usecoppper THW or aluminum XHHW. For sizes #1 AWG and smaller, use onlycopper wire with 600V insulation, types TW, THHN, or THW - stranded in sizes #8 and larger, solid in sizes #10 and smaller. Control wiring shall be #14,stranded. Use type THHN for wires entering or passing through fluorescentlighting fixtures. All motors shall be wired with copper conductors only.9.METERING:A.EC shall coordinate whether or not meters require lever bypass with localutility and provide all meters with a lever bypass when required. Finish per owner or architect.(RG6 QUAD SHIELDED CABLE) 3/4"CCONDUIT STUBBED TO ACCESSIBLECEILING, PLENUM RATED WIRE, WHENREQUIRED, RAN TO BACK BOARDTELEPHONEONE-LINE DIAGRAMTELEPHONE/COMPUTERROUGH-INNO SCALEFIRE ALARM CONTROL PANELFIRE ALARM ONE LINE DIAGRAMNO SCALENOTES:1. ALL WIRE WILL BE SHIELDED. WIRING PER MANUFACTURERS REQUIREMENTS.2.REFERENCE FLOOR PLANS FOR QUANTITIES.3.PROVIDE PLENUM RATED WIRE WHERE REQUIRED.4. FIRE ALARM SYSTEM IS SHOWN AS A DESIGN BUILD SYSTEM.FINAL DESIGN AND DEVICE QUANTITIES ARE BY THE ELECTRICAL CONTRACTOR.EXTERIORHORN120V, 1PBATTERYBACKUPDIALERTELEPHONEMMHPMMMMMMFSRCMIN.#14AWGFANSHUTOFF.23A 24VDC ADAHORN/ STROBE MAX.15 PER CIRCUITGENERAL NOTES ALL SHEETSTHE ELECTRICAL CONTRACTOR WILL PROVIDE A WALK THROUGH WITH THE OWNER/ARCHITECTPRIOR TO FINAL ROUGH-IN AS FOLLOWS:xCONFIRM ALL LOCATIONS FOR LIGHT SWITCHES; ADD THREE WAYS IF FOUND NECESSARY.xREVIEW RECEPTACLE LOCATIONS; MOVE AS REQUIRED.PROVIDE UNIT PRICING IFADDITIONAL RECEPTACLES ARE REQUIRED.xREVIEW RECEPTACLE LOCATIONS AT COUNTERS AND CONFIRM IF THOSE RECEPTACLESSHOULD BE ABOVE COUNTER OR BELOW. MOVE AS REQUIRED.IN GENERAL CONFIRM POWER AND LIGHTING REQUIREMENTS. THE ELECTRICIAN SHOULD BEPREPARED TO REWORK SOME DEVICE LOCATIONS. SIGNIFICANT REWORK SHOULD BE FLAGGEDAND UNIT PRICING PROVIDED AND WRITTEN AUTHORIZATION FOR ADDITIONAL COSTSAPPROVED PRIOR TO PROCEEDING.Lighting fixtures.Panelboard(s).2.1.D.E.F.G.H.I.J.Applicable codes: National Electric Code (2011)and to the requirements of Federal, State or other City agenciesTown of Vail Electrical Code, pertinent NFPA publicationsConform to the prevailing edition and amendments thereto of thehaving jurisdiction.Provide tamper proof receptacles at all residential areasas required by code.F.Operating, Maintenance and identification instructions manuals, if any.K.TELEPHONEPEDESTAL15 amp will be acceptable for Residences. ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMITDocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 SERVICE GROUNDING DETAILWATER SERVICEINCOMING PIPE(3) 3/4"x10'DRIVEN GROUND RODSIF REQUIREDBY LOCAL AHJBONDING JUMPER(#3/0 CU G) 3/4"C#6 TO TELEPHONE/TVWATERMETERBUILDINGSTEELGAS SERVICENGNGINCOMING PIPECONCRETE- ENCASED ELECTRODEREQUIRED IN FOOTING/FOUNDATIONPER NEC 250-50. MINIMUM 20' #4 REBAROR MINIMUM 20' #4 BARE COPPER.MUST BE INSTALLED ATFOOTING INSPECTION.NO SCALENOTE: PROVIDE #3/0 CU CONDUCTORS TO ALL GROUNDING ELECTRODES.BONDING JUMPER(#3/0 CU G) 3/4"CNGPROVIDE INTERSYSTEMBONDING TERMINATION ATTHE SERVICE EQUIPMENT ASREQUIRED PER NEC 250.94NGMAIN DISCONNECTBOND TO ENCLOSUREGROUND BUS+80"AFFP+80:AFFTELEPHONE ONE-LINE DIAGRAM:TELEPHONE/COMPUTER ROUGH-IN:#6 CU GROUTE WIRE AT CEILING PARALLEL ORPERPENDICULAR TO STRUCTURE. SECURETO STRUCTURE AT 4' INTERVALS OR LESS.STUB UP TO ABOVEACCESSIBLE CEILNGSTRUCTURED CABLEDISTRIBUTION PANEL(2#CAT 6) 3/4"C,PLENUM RATED WIREWHEN REQUIRED(2) RJ-45 IN SINGLEGANG BOX AT 18"AFF UNOCOLD WATER PIPENETWORK RACKWITH PATCHPANEL(PULLWIRE)2"CNO SCALE1[(PULLWIRE)4"C]BUILDING4B TELENO SCALETERMINATE LABELAND TESTVsDFcLUTRONCLEARCONNECTWIRELESSLINE-VOLTAGEWIRING2 #12 AWGLOW-VOLTAGEWIRING2 #18 AWGFIXTUREMODEL #: FC-VSENSORMODEL #:PJ2-3BRL-GWH-L01RELAYMODEL #:FCJS-0101 REQUIRED PERLIGHTING CONTROL120V/277VINPUT FEEDSWITCHED POWER(1A MAX)0-10V DIM(6 mA MAX)TO WIREDSENSORPOWPAK WIRELESS FIXTURE CONTROLFOR 0-10 V CONTROLDIMENSIONS:3.42"[87mm] (H) X 2.82"[72mm] (W) X 1.25"[32mm] (D)FCJS-010TO FIXTURECONTROLLERFC-VSENSORPOWPAK FIXTURE SENSORVACANCY1.5"[38mm] (DIA) X 0.65"[17mm] (D)*DEVICE IS SURFACE-MOUNTEDTYPICAL 0-10V FIXTURE CONTROLLERTYPICAL POWPAK FIXTURE VACANCY/DAYLIGHT SENSORTYPICAL MANUAL OVERRIDEUTRONUTRONLLL434 MHZ PICO WIRELESS, LIGHT3 BUTTON CONTROL WITH RAISE/LOWERSHOWN WITH CW-1-WHCLARO WALLPLATEPICO DIMENSIONS:2.61"[66,3mm] (H) X 1.28"[32,5mm] (W) X 0.37"[9,4mm] (D)W/WALLPLATE:4.69"[119mm] (H) X 2.94"[74,7mm] (W) X 0.37"[9,4mm] (D)*SEE SPECIFICATION SHEET FORMOUNTING INSTRUCTIONSPJ2-3BRL-GWH-L01WIRING LEGEND:1-WAY RF COMMUNICATION2-WAY RF COMMUNICATIONINPUT POWER (NORMAL)2 #12AWG (4 mm2)INPUT POWER (NORMAL-EMERGENCY)3 #12AWG (4 mm2)0-10V SIGNAL: 2 #18AWG (1.0 mm2)2 #18AWG (1.0 mm2)3 #18AWG (1.0 mm2)FIXTURE CONTROLDIMMERVACANCY CONTROLFcDVcLIGHTING CONTROL ONE-LINEDIAGRAM:NO SCALEofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMITDocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 GENERAL NOTES:1.XSHEET DETAIL NOTES:REVIEW ALL RECEPTACLE CIRCUITS. REVIEW WITH ENGINEER IFRECEPTACLE CIRCUITS CONTAIN MORE THAN 6 DUPLEX RECEPTACLES.NEW RECEPTACLES TO BE ADDED TO EXISTING RECEPTACLE CIRCUITS.PROVIDE CONDUIT RACEWAY ONLY FOR INFRARED HEATERS. OWNER TOCONFIRM LOCATION OF INFRARED HEATERS PRIOR TO ROUGH-IN. INFRAREDHEATERS NOT TO INTERFERE WITH LUMINAIRES.ALL NEW AND EXISTING VAV BOXES ARE LOW VOLTAGE AND POWER BYMECH SUB.1JJJJJJJJJJJJJJJJJJJJJGFIWPGFIWPJJ(E)(E)(E)E(E)(E)(E)(E)(E)(E)(E)(E)(E)(E)()(E)(E)(E)(E)(E)(E)(E)(E)(E)(E)(E)(E)E((E)(E)(E)GFIACA(E)E)(E)GFIAC+60" AFF" +60" AFF GFIACGRE-25GRE 25GRE-23GRE-3611(E)MAIN RELAYCONTROL PANELNONE ZONE ANALOGCONTROLLERW/ DIGITAL TIMERGLE-9, PARTIALARIGLE-9, PARTIALGLER(E)(E)1111+60" AFF"+60" AFF++6660000"++++66660000"++6666000066"""A1+60" AFF1+48" AFF+48" AFF11(E)(E)GFIGACAA(E)((E(E)))))(E)(E))(E)KKK(E)(E)K(E)JJJPROVIDE (PULLWIRE) 1"CHOMERUN TO PANELGLE. TERMINATE ABOVEACCESSIBLE CEILING ANDTAG "SPARE."GRE-GFIWPVAV(E))(VAV1-2VAV1-1PP1MMTO222(PULLWIRE)1/2"CRE(PULLWIRE)1/2"CUE33333ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMITNORTH1ST FLOOR POWER & SYSTEMS PLANSCALE: 1/4" = 1'0"DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 (E)(E)(E)(E)(E)(E)(E)(E)(E)(R)(E)(E)(E)(E)(E)(E))(E)((E)(E)SHEET DETAIL NOTES:REVIEW ALL RECEPTACLE CIRCUITS. REVIEW WITH ENGINEER IFRECEPTACLE CIRCUITS CONTAIN MORE THAN 6 DUPLEX RECEPTACLES.NEW RECEPTACLES TO BE ADDED TO EXISTING RECEPTACLE CIRCUITS.ALL NEW AND EXISTING VAV BOXES ARE LOW VOLTAGE AND POWER BYMECH SUB.111111GRE-35R(E)(E)(E)(E)(E)111(E)JJPROVIDE (PULLWIRE) 1"CHOMERUN TO PANELGLE. TERMINATE ABOVEACCESSIBLE CEILING ANDTAG "SPARE."GRE-VAVVAAVV(E))(VAV(E))(22222222ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMITNORTH2ND FLOOR POWER & SYSTEMS PLANSCALE: 1/4" = 1'0"DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 (E)DDDDAAAAAACCCCCCCC(E)E(E)EAAAAC1C1MM(E)(E)((((E)(E)((E)(E(E)(E)(E)(R)()(E))((E))MMMMMMCCCCCC(E)CCDDDAAADDDDMCD(E)(E)TOR TO CONNECTOOROOTCONCONTRACTNNNCTTIXTURES TO EMXOOSERTUTXUSHADED FOEFCIRCUITTCRTLIGHTING CGCC(E)(R)(E)EC1C1CGENERAL NOTES:1.REUSE EXISTING 277V LIGHTING CIRCUITS.2.ANY LIGHT FIXTURES BEING REMOVED LOCATE TO NEW LOCATIONSIDENTIFIED BY "RL" OR TURN OVER TO OWNER.(E)(E)ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMITNORTH1ST FLOOR LIGHTING PLANSCALE: 1/4" = 1'0"DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 (E)EE))E(E(EE(E)EE(E)()E(E)E(E)(E)(E)(E)(E)()(RL)(E)(E)DDD(DD(((RL)(RL)(E)(E)(E))(E)(E))(E)(E)(E)MMMMMMMD(E)(RL)DMDDDDDDDD(E)CONTRACTOR TO CONNECTNOOTSHADED FIXTURES TO EMSDXFURTSMAEDFXURESOEMLIGHTING CIRCUITILGTHGIUNGCNGRICCUTMM(RL)L)L)L)D(RL))DD(RL)(RL))MALL CURRENT LAMPSFOR LUMINAIRE TO BEREPLACED BY LEDLAMPSCCDDCCDDDD(E)(((((E)GENERAL NOTES:1.REUSE EXISTING 277V LIGHTING CIRCUITS.2. ANY LIGHT FIXTURES BEING REMOVED LOCATE TO NEW LOCATIONSIDENTIFIED BY "RL" OR TURN OVER TO OWNER.ofwww.aec-vail.comPO Box 8489, 40801 US Hwy 6 & 24, Ste 214, Avon, Colorado, 81620Mechanical, Electrical & Lighting Design ServicesArchitectural Engineering ConsultantsTelephone: 970-748-8520Drawn By:Checked By:DATE:ISSUE:AEC PROJECT #:EAGLE COUNTYATTORNEY OFFICEREMODEL18034.00An Office with LEED™ Accredited Professionals07/11/18PROGRESS SET07/23/18PRICING10/05/18PERMITNORTH2ND FLOOR LIGHTING PLANSCALE: 1/4" = 1'0"DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 INSR ADDLSUBRLTRINSR WVD DATE (MM/DD/YYYY) PRODUCER CONTACTNAME: FAXPHONE(A/C, No):(A/C, No, Ext): E-MAILADDRESS: INSURER A : INSURED INSURER B : INSURER C : INSURER D : INSURER E : INSURER F : POLICY NUMBER POLICY EFF POLICY EXPTYPE OF INSURANCE LIMITS(MM/DD/YYYY) (MM/DD/YYYY) COMMERCIAL GENERAL LIABILITY AUTOMOBILE LIABILITY UMBRELLA LIAB EXCESS LIAB WORKERS COMPENSATION AND EMPLOYERS' LIABILITY DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) AUTHORIZED REPRESENTATIVE INSURER(S) AFFORDING COVERAGE NAIC # Y / N N / A (Mandatory in NH) ANY PROPRIETOR/PARTNER/EXECUTIVEOFFICER/MEMBER EXCLUDED? EACH OCCURRENCE $ DAMAGE TO RENTED $PREMISES (Ea occurrence)CLAIMS-MADE OCCUR MED EXP (Any one person) $ PERSONAL & ADV INJURY $ GENERAL AGGREGATE $ GEN'L AGGREGATE LIMIT APPLIES PER: PRODUCTS - COMP/OP AGG $ $ PRO- OTHER: LOCJECT COMBINED SINGLE LIMIT $(Ea accident) BODILY INJURY (Per person) $ANY AUTO OWNED SCHEDULED BODILY INJURY (Per accident) $AUTOS ONLY AUTOS AUTOS ONLYHIRED PROPERTY DAMAGE $AUTOS ONLY (Per accident) $ OCCUR EACH OCCURRENCE $ CLAIMS-MADE AGGREGATE $ DED RETENTION $ $ PER OTH-STATUTE ER E.L. EACH ACCIDENT $ E.L. DISEASE - EA EMPLOYEE $ If yes, describe under E.L. DISEASE - POLICY LIMIT $DESCRIPTION OF OPERATIONS below POLICY NON-OWNED SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer any rights to the certificate holder in lieu of such endorsement(s). COVERAGES CERTIFICATE NUMBER: REVISION NUMBER: CERTIFICATE HOLDER CANCELLATION © 1988-2015 ACORD CORPORATION. All rights reserved. The ACORD name and logo are registered marks of ACORDACORD 25 (2016/03) ACORDTM CERTIFICATE OF LIABILITY INSURANCE Arch Insurance Company Travelers Property Cas. Co. of America 10/18/2018 USI Colorado, LLC Construction P.O. Box 7050 Englewood, CO 80155 800 873-8500 Client Manager 800 873-8500 303-831-5295 den.contractors@usi.com FCI Constructors, Inc. PO Box 1767 Grand Junction, CO 81502 11150 25674 AX X X X X ZAGLB9220002 10/01/2018 10/01/2019 1,000,000 100,000 10,000 1,000,000 2,000,000 2,000,000 A X XX X X ZACAT9242102 10/01/2018 10/01/2019 1,000,000 B XX X0 XXZUP15P9635718NF 10/01/2018 10/01/2019 25,000,000 25,000,000 A N X ZAWCI9389202 10/01/2018 10/01/2019 X 1,000,000 1,000,000 1,000,000 Re: Eagle County Attorney's Facilities Office Remodel As required by written contract or written agreement, Eagle County, its associated or affiliated entities, its successors and assigns, elected officials, employees, agents and volunteers are included as Additional Insureds as respects General Liability and Auto Liability but only as respects work performed on behalf of the named insured. Eagle County P.O. Box 850 Eagle, CO 81631 1 of 1#S24099131/M23954064 FCICONClient#: 1082345 SABBC1 of 1#S24099131/M23954064 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 This page has been left blank intentionally. DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 2 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 2 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 2 8 DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 DATE (MM/DD/YYYY) AGENCY PHONE(A/C, No, Ext):COMPANY E-MAILADDRESS: FAX (A/C, No): CODE: SUB CODE: AGENCY CUSTOMER ID #: INSURED LOAN NUMBER POLICY NUMBER EFFECTIVE DATE EXPIRATION DATE THIS REPLACES PRIOR EVIDENCE DATED: LOCATION/DESCRIPTION COVERAGE/PERILS/FORMS AMOUNT OF INSURANCE DEDUCTIBLE NAME AND ADDRESS AUTHORIZED REPRESENTATIVE CONTINUED UNTIL TERMINATED IF CHECKED MORTGAGEE ADDITIONAL INSURED LOSS PAYEE LOAN # THIS EVIDENCE OF PROPERTY INSURANCE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE ADDITIONAL INTEREST NAMED BELOW. THIS EVIDENCE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS EVIDENCE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE ADDITIONAL INTEREST. SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. PROPERTY INFORMATION COVERAGE INFORMATION REMARKS (Including Special Conditions) CANCELLATION ADDITIONAL INTEREST ACORD 27 (2009/12) 1 of © 1993-2009 ACORD CORPORATION. All rights reserved. The ACORD name and logo are registered marks of ACORD THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS EVIDENCE OF PROPERTY INSURANCE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. ACORDTM EVIDENCE OF PROPERTY INSURANCE FCICON 10/18/2018 USI Colorado, LLC Construction P.O. Box 7050 Englewood, CO 80155 800 873-8500 1082345 den.contractors@usi.com Travelers Indemnity Company FCI Constructors, Inc. PO Box 1767 Grand Junction, CO 81502 QT660142D8844TIL18 10/01/18 10/01/19 Builders Risk, Special Form, Reporting Form Replacement Cost Fire Resistive construction 75,000,000 10,000 Frame or Joisted Masonry construction 25,000,000 10,000 Flood, sub limit 10,000,000 25,000 Earth Movement, Sub limit 10,000,000 25,000 Transit 250,000 10,000 Temporary Location 250,000 10,000 (See Attached Coverage Info.) ****** Description of Operations ****** RE: Eagle County Attorney's Facilities Office Remodel Eagle County P.O. Box 850 Eagle, CO 81631-0850 2 S 966022 SABBC DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638 COVERAGE/PERILS/FORMS AMOUNT OF INSURANCE DEDUCTIBLE SAGITTA 27.3 (12/09) of COVERAGE INFORMATION (Continued from page 1.) 2 2 S 966022 SABBC DocuSign Envelope ID: 3764BB40-0FEA-44DF-933C-8C7BCE04B638